LCDInfo.com
http://forum.lcdinfo.com/

Noritake CU20026SCPB-T30A working with LCDInfo??
http://forum.lcdinfo.com/viewtopic.php?f=10&t=2141
Page 1 of 1

Author:  zephyr [ Tue Feb 06, 2007 3:47 ]
Post subject:  Noritake CU20026SCPB-T30A working with LCDInfo??

Hi..
I have a bunch of these displays.
Are they supported in LCDInfo?

The controller is a FIPC8367 parallell/serial controller.

I have wired it according to my best knowledge, but i only get a underline curson flashing wildly around the display.

Here is how i wired it

parallel Port: Display (NEC):
Pin: Name: Name: Pin:

1 /STROBE -------------- /WR 1
2 D0 -------------- D0 15
3 D1 -------------- D1 13
4 D2 -------------- D2 11
5 D3 -------------- D3 9
6 D4 -------------- D4 7
7 D5 -------------- D5 5
8 D6 -------------- D6 3
9 D7 -------------- D7 1
10 /ACK --o
11 BUSY --o------BUSY 27
16 ---------------- /CS 23
18 - 25 GND ------------o-- GND 2,4,6,8,10,12,14,16,18,20,22,24,26,28,30,32,34


Does this sound somewhat right?

Here is datasheet for the displays.

http://www.qscomp.cz/Pdf/CU20026SCPB-T30A-01.pdf

Author:  Henri [ Sat Feb 10, 2007 2:06 ]
Post subject: 

The closest existing driver is probably the CU20045SCPB-T23A driver. You should get the CU20045SCPB-T23A datasheet and compare the commands to see if they match.

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/