LCDInfo.com

http://www.lcdinfo.com
It is currently Fri Mar 29, 2024 6:53

All times are UTC + 2 hours




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Wed May 19, 2004 1:30 
Offline

Joined: Thu Oct 24, 2002 2:24
Posts: 64
Location: Lisboa , Portugal
Well i've been to do this long time ago , but always witout time to do it, but , i managed to get this as a school project and so here it is the final result with lot's of pictures of all the Work progress and the Bay in action

THe Start !!

The used LCD ->240 x 128 with T6963C Controler
Image

The front part of the Bya being adjusted
http://pwp.netcabo.pt/samtech/mods/lcd_bay/imag0101.jpg

The acrilic base for the LCD Bay
Image

View of the LCD bay and it's metalic base
Image

The first LCD tests and from the base and rest of the ilumination

The ilumination test from the Acrilic base
Image

The LCD Test
Image

The board wiith the ilumination conectors, the inverter conector and the LCD conector:
Image

More ilumination test's
Image

Image

The sides of the bay , the acrilic molding ans the painting.

The acrilic base after all ajustment's ,holes and some edge polishing:
Image

The sides before adjustment
Image

The sides after adjustment and polishing
Image

A very goo hair dryer from Black&Decker with 2000W :D to mold the acrilic (Aka heat gun) :D
Image


The acrilic for the back cover after molding, and preparing to finish up the sides
Image

The sides and back cover after finished and polished:
Image
Image

THe painting of the metalic base, the sides (Tha were painted on the inside , so we can get a miror finish ) and the front of the bay:
Image
Image
Image

To place the acrilic on the bay there were 2 ideas , but othe firs on gave some bad result's due to a chemical reaction between the acrilic , the paint and a paste used to fill in the space, so i opted by polishing the front acrilic as the other part's and the result was much better then i expected :D

Image

Image
Image

And what all we where wainting for , the final result !!

Left , right and front view of the bay
Image
Image
Image

back view
Image

The Bay in action
Image
Image

It's content's after all conected:
Image

My WOrk Bench :P
Image

Well that's all , hope you to enjoy it as much as i do ;-)

Samtech

Portugal RULA !!!!
Modding PT By SAmtech

_________________
The Power is Within your Hands ,use it wisely...
Image
XP 2000+
A7N8X Dlx
256 Mb DDR PC3200 OCZ
GF 4 Ti 4200 128 DDR
180 Gb
Studio PCTV Pro


Top
 Profile  
 
 Post subject:
PostPosted: Wed May 19, 2004 7:48 
Offline

Joined: Mon Jan 26, 2004 3:52
Posts: 10
Wow, that is a REALLY nice job. I'm going through my own LCD project right now, except mine will be taking up 3 5 1/4" bays. Right now I'm on my fifth different PCB, but this one should work.

I'm curious though, you're in Portugal, but all the text on the bay is in English. Any reason why?

And this guide wouldn't be complete without tell ing people where you got the LCD from. Blue/white is probably the most sought after color combo for LCDs, so not telling people is just wrong, even if you ripped it out of some really hard to comy by equipment.


Top
 Profile  
 
 Post subject:
PostPosted: Thu May 20, 2004 21:57 
Offline

Joined: Wed Apr 07, 2004 21:06
Posts: 2
Location: Portugal / Coimbra
PARABENS 100% TUGA STYLE!!!!!!!!!!!!!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group