LCDInfo.com http://forum.lcdinfo.com/ |
|
Bug in latest build (build19, T6963C)? http://forum.lcdinfo.com/viewtopic.php?f=10&t=949 |
Page 1 of 1 |
Author: | croc4 [ Thu Dec 16, 2004 21:47 ] |
Post subject: | Bug in latest build? |
I tried the latest build, and between the older version (ver 6) and this build, I am seeing a difference in the way my LCD display gfx. It seems that the latest version does not deal with a 128x128 display correctly. It seems to cutoff the first few pixels on the left hand side of the display, the previous build does not do this. I am using a 128x128 display with a T6963C controller. |
Author: | KrAkKeN [ Fri Dec 17, 2004 6:20 ] |
Post subject: | |
Hmm... that's strange, I haven't changed anything in the driver section and I have a T6369C 240x128 and that seems to work fine. Here is the source: http://users.on.net/~krakken/LCD/lcdinfo_source.zip |
Author: | croc4 [ Fri Dec 17, 2004 6:34 ] |
Post subject: | |
strange, I tried a few times modifying my xml file thinking that was the problem, but got no where, as soon as I went back to the older version things looked correct. |
Author: | KrAkKeN [ Fri Dec 17, 2004 8:49 ] |
Post subject: | |
Can you shed any light on this Henri? The only thing I can think of is the fact that it's compiled on VC++ .NET 2003 rather than 6? Henri, I told you about the compiler errors I was getting (the iterator errors) do you think that when I changed it it would have messed something up? The thing I don't understand is that it seems to work fone for me. |
Author: | croc4 [ Fri Dec 17, 2004 19:13 ] |
Post subject: | |
If it helps I can send you my config files, they are set up for a 128x128 display. |
Author: | Henri [ Thu Dec 30, 2004 21:12 ] |
Post subject: | |
Yes as the driver is still the same there shouldn't be any change causing problem there. But maybe it is something about VC++ .NET 2003 handling something differently compared to VC6. One more reason for me to get newer VC to test this. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |