Noritake GU128x32-311
Noritake CU20045SCPB-T23A
Coming up soon Henri
.Your wanna be supported driver list is becoming shorter and shorter 
| LCDInfo.com http://forum.lcdinfo.com/ |
|
| Displays waiting to be supported http://forum.lcdinfo.com/viewtopic.php?f=14&t=591 |
Page 1 of 2 |
| Author: | Henri [ Wed Apr 07, 2004 16:20 ] |
| Post subject: | Displays waiting to be supported |
Noritake GU128x32-311 I have one of these but the vacuum was lost when I got it. If I get a working piece I'm going to write a driver. Noritake CU20045SCPB-T23A I have one of these too but the vacuum was also lost when I got it. If I get a working piece I'm going to write a driver. Noritake CU20026SCPB-S1A If I can figure this out it's going to be supported. SED1520 / SED1530 Planned but as I don't have a display with these controllers I'm still looking for one. I should be able to support other displays too if someone is able to supply me one for development. If you are interested you can contact me. |
|
| Author: | jsc69 [ Thu Apr 08, 2004 12:07 ] |
| Post subject: | |
Hi Henri, i've got a SED1520 display and may support you. I'll contact you by email. |
|
| Author: | coorz [ Tue May 18, 2004 14:23 ] |
| Post subject: | |
Noritake GU128x32-311 Noritake CU20045SCPB-T23A Coming up soon Henri .Your wanna be supported driver list is becoming shorter and shorter
|
|
| Author: | Henri [ Tue May 18, 2004 17:37 ] |
| Post subject: | |
Hehe, guess I need to get some new displays on the list then
I have just received a Nokia 7110 display with SED1565 controller. Someone has also given me a broken Ericsson A2618 which has PCF8548 as the lcd controller I believe. I should still have this phone somewhere. I might have also found some clues for the CU20026SCPB-S1A that I need to check. |
|
| Author: | mbates14 [ Mon May 31, 2004 22:07 ] |
| Post subject: | |
UPDATE. T23A is now supported in LCDhype, and Henri pry knows this, but I ran into a thread that the writer of liquidmp3 has posted a wiring, and got it working. |
|
| Author: | coorz [ Mon May 31, 2004 22:30 ] |
| Post subject: | |
mbates14 wrote: UPDATE.
T23A is now supported in LCDhype, and Henri pry knows this, but I ran into a thread that the writer of liquidmp3 has posted a wiring, and got it working. I believe you mean the Noritake 128x32-311 VFD. The T23 will be supported by Henri too 
|
|
| Author: | Henri [ Tue Jun 01, 2004 0:10 ] |
| Post subject: | |
Yes, we have agreed with Zotty about the wiring for the -311. Of course the driver will have custom wiring possibility but having same hardware is always good I think. |
|
| Author: | mbates14 [ Sun Jun 06, 2004 18:04 ] |
| Post subject: | |
exactly, what date are we looking at for the 311 driver release, im getting so anxious, im gonna pee my pants! LOL. |
|
| Author: | coorz [ Sun Jun 06, 2004 20:01 ] |
| Post subject: | |
Patience my dear, you have been waiting for so long, it'll only get better when it's there! |
|
| Author: | Henri [ Wed Jun 09, 2004 14:52 ] |
| Post subject: | |
I received both the 311 and T23A this week (you can thank coorz for that btw ) so drivers should be coming soon. I have both alive but the 311 is not quite stable yet but I'm working on it.
|
|
| Author: | coorz [ Wed Jun 09, 2004 17:21 ] |
| Post subject: | |
Henri wrote: I received both the 311 and T23A this week (you can thank coorz for that btw
) so drivers should be coming soon. I have both alive but the 311 is not quite stable yet but I'm working on it.Thx Henri, daylight pix of the T23 posted. Looks fantastic bright even in daylight. Now get working on the WinAmp Spectrum Analyzer .
Evening pix coming well eh this evening 
|
|
| Author: | mbates14 [ Wed Jun 09, 2004 21:32 ] |
| Post subject: | |
spectrum analyzer will be hard on the T23A it only supports 2 user definable custom chars. I tried. anymore, and the display will corrupt. |
|
| Author: | SBR Partners [ Thu Jun 24, 2004 6:44 ] |
| Post subject: | |
 email me and I'll send you a GU128X32-311
|
|
| Author: | mbates14 [ Sat Jun 26, 2004 23:14 ] |
| Post subject: | |
Your where I got mine in the first place! BTW, I just bought one from you on ebay, and I was on vacation, so Im getting ready to send you money. |
|
| Author: | chr0n1c [ Sat Jun 24, 2006 3:27 ] |
| Post subject: | |
SBR Partners wrote: :) email me and I'll send you a GU128X32-311
sbr... where did you get the picture of these that you were selling on ebay? you told me you didn't know anything about them, but yet you have a pic of them working! i can't get this thing to work... all i can get is a blinking dot, or nothing when i hook it up to a pc. yeah i checked my connector pinout like 3 times... does anyone have one of these working? can i see some pics? ok i found pics in the forum, any chance i can see the config files for the working one? |
|
| Page 1 of 2 | All times are UTC + 2 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|