| LCDInfo.com http://forum.lcdinfo.com/ |
|
| RS-232 LCD http://forum.lcdinfo.com/viewtopic.php?f=14&t=719 |
Page 1 of 1 |
| Author: | rudi Grobler [ Tue Jun 22, 2004 14:54 ] |
| Post subject: | RS-232 LCD |
Hi, I have a KS1080 LCD with a RS-232 -> LPT converter board. Is there any LCD's that LCDInfo support that runs of the COM port? Is there any way of implementing a COM port lcd in the current version of LCDInfo? |
|
| Author: | Henri [ Thu Jun 24, 2004 10:47 ] |
| Post subject: | |
Yes there are already several serial lcd's supported by LCDInfo so what you have in mind is possible. |
|
| Author: | rudi Grobler [ Tue Jun 29, 2004 8:20 ] |
| Post subject: | |
A friend of mine designed a board that takes a serial command and convert it to a 8 bit ttl signal. It supports 16 bits (RTS toggels between hi and low byte) and he routed the signals to support 3 different types of lcds with straight ribbn cable so it is a very simple and easy to use board. The best of all is it only has 3 components on so it is cheap. Less than $12. Iwant to use the ks driver to and drive it serialy |
|
| Author: | MarsWalker [ Fri Jul 16, 2004 18:37 ] |
| Post subject: | |
Hi, Can you or your send post the stuff needed to build on of those pcbs ? Tanxs, ||\//|ars \\/\\/alker |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|