LCDInfo.com • View topic

View unanswered posts | View active topics

Board index » LCDInfo 0.6-> » Drivers

All times are UTC + 2 hours

RS-232 LCD

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

rudi Grobler

Post subject: RS-232 LCD

Posted: Tue Jun 22, 2004 14:54

Joined: Tue Dec 02, 2003 12:03
Posts: 107
Location: South Africa

Hi,

I have a KS1080 LCD with a RS-232 -> LPT converter board. Is there any LCD's that LCDInfo support that runs of the COM port? Is there any way of implementing a COM port lcd in the current version of LCDInfo?

_________________
Rudi Grobler

Top

Henri

Post subject:

Posted: Thu Jun 24, 2004 10:47

Joined: Sun May 05, 2002 22:05
Posts: 2063
Location: Lappeenranta, Finland

Yes there are already several serial lcd's supported by LCDInfo so what you have in mind is possible.

Top

rudi Grobler

Post subject:

Posted: Tue Jun 29, 2004 8:20

Joined: Tue Dec 02, 2003 12:03
Posts: 107
Location: South Africa

A friend of mine designed a board that takes a serial command and convert it to a 8 bit ttl signal. It supports 16 bits (RTS toggels between hi and low byte) and he routed the signals to support 3 different types of lcds with straight ribbn cable so it is a very simple and easy to use board. The best of all is it only has 3 components on so it is cheap. Less than $12. Iwant to use the ks driver to and drive it serialy

_________________
Rudi Grobler

Top

MarsWalker

Post subject:

Posted: Fri Jul 16, 2004 18:37

Joined: Thu Jul 15, 2004 20:33
Posts: 3

Hi,

Can you or your send post the stuff needed to build on of those pcbs ?

Tanxs,

||\//|ars \\/\\/alker

Top

Page 1 of 1

[ 4 posts ]

Board index » LCDInfo 0.6-> » Drivers

All times are UTC + 2 hours

Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum