LCDInfo.com

http://www.lcdinfo.com
It is currently Thu Dec 14, 2017 6:09

All times are UTC + 2 hours




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Mon Dec 29, 2008 16:38 
Offline

Joined: Mon Dec 29, 2008 16:34
Posts: 2
is it possible to connect my planar el md512.256 to the USB13700
and Howe must i connect him
and where can i buy the USB13700


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 29, 2008 21:09 
Offline

Joined: Sun May 05, 2002 22:05
Posts: 2063
Location: Lappeenranta, Finland
This is the display?
http://www.planar.com/products/docs/IBU ... finlux.pdf

These are not compatible with the USB13700. But there is something planned based on the USBD480 platform that could probably also drive these Planar displays. The USBD480 is based on a FPGA so it's relatively easy to make it drive these less common interfaces.

It's not currently the highest priority project as there might not be that much use for a specialized controller like this. But if anyone else is interested in that kind controller then knowing that there would be potential users can help push the project forward.

Quote:
and where can i buy the USB13700

To buy USB13700 you can use the contact information here and tell what you would like to buy and where it should be shipped to get more information:
http://www.lcdinfo.com/contact.html

Some basic information is available in the Ordering section here:
http://www.lcdinfo.com/products/usb13700.html


Top
 Profile  
 
 Post subject:
PostPosted: Tue Dec 30, 2008 15:27 
Offline

Joined: Mon Dec 29, 2008 16:34
Posts: 2
where can i buy an controller that can drive this display


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jan 02, 2009 16:18 
Offline

Joined: Sun May 05, 2002 22:05
Posts: 2063
Location: Lappeenranta, Finland
At this time I'm not aware of any specific suitable controller board for that Planar display that would work for your needs.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 12, 2009 13:18 
Offline

Joined: Sun May 05, 2002 22:05
Posts: 2063
Location: Lappeenranta, Finland
Some Planar EL displays have been tested using the USBD480 with custom FPGA configuration as a controller now.

Here are adapter boards that have been designed to be mounted on top of the existing USBD480 board:

Image

Image

Image

And then slightly different one that would mount directly to the connector of the display:

Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group