LCDInfo.com

http://www.lcdinfo.com
It is currently Tue Mar 19, 2024 12:39

All times are UTC + 2 hours




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Thu Apr 08, 2010 11:02 
Offline

Joined: Wed Mar 24, 2010 22:20
Posts: 2
Hello and sorry if this is noob questions!I have bought a USB controller from Henri.The thing is im unsure where to connect the wires from the controller to the display.

Also its backlit,I have an inverter,But on the controller board i have a 4 pin connector with the lable backlight.Do i need to connect the display to this output or is it for another type of display?

Do i need knobs to adjust contrast and brightness or is that overkill?

It was alon time since i connected my old display so i consider myself as a noob

If someone could help me i would be very happy!Want it up and running asap
:roll:

----------------------------------------------------------
Pin-out Toshiba Display 640*200 pixels

* 1: GND
* 2: 50 Hz
* 3: FRAME GND
* 4: Line
* 5: Data Shift (Pixel Strobe)
* 6: Logical Ground
* 7: Data 3
* 8: Data 2
* 9: Data 1
* 10: Data 0
* 11: Logical GND
* 12: +5V
* 13: -17 - 19V
* 14: -21V (Contrast)
* 15: GND
------------------------------------------------------------


Controller board

1 FPFRAME First line marker
2 FPLINE Data latch
3 GND Ground (0V)
4 FPSHIFT Data shift
5 FPD0 Display data
6 FPD1 Display data
7 FPD2 Display data
8 FPD3 Display data
9 GND Ground (0V)
10 GND Ground (0V)
11 +5V Power supply (+5V)
12 +5V Power supply (+5V)
13 MOD Alternate (M / MOD / WF) (Note 1)
14 /DISPOFF Display On / Off (Note 1)
15 VEE Power supply for LCD drive
16 VADJ LCD contrast adjust voltage
17 +3.3V Power supply (+3.3V) (Note 1)
18 NC Not connected
19 +12V Power supply (+12V)
20 +12V Power supply (+12V)



As i said im unsure where to connect the pins to eachother








.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Apr 15, 2010 23:18 
Offline

Joined: Sat Feb 02, 2008 20:44
Posts: 16
Lets see what we got.

LCD:
1,3,6,11,15 = to GND

4 = 2 FPLINE Data latch
5 = 4 FPSHIFT Data shift
7-10 = according Datapins on USB13700 (5-8)
12 = 11 +5V Power supply (+5V)
13 = 15 VEE Power supply for LCD drive
14 = 16 VADJ LCD contrast adjust voltage

I thin thats it. What about Pin2 (50Hz), i dunno.

Regards,

Christian

Edit: Backlight might get connected to the 4-Pin-Header. (GND,12V i guess) It also might get connected external, thats up to you. :)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group