Quote:
I did check DigiKey in the UK for those connectors, but I wasn't sure which one it was exactly and they have a punitive mimimum order requirement and shipping costs. Do you have the stock number for it?
Oh yes, I know . I had to purchase their minimum number of pieces and I payed really a lot .
Therefore I can offer you some of these connector if you want. But I don't want to be obtrusive.
The device number I used is : H2746-ND DF12-30DS-0,5V(80)
Quote:
Could you tell me how you worked out how to initialise the display?
I placed the story about what I did on my homepage, but in German only.
I used a Logic state analyzer similar as you did with the EVB on the picture
above. Afterwards, I used a small MSP430 EVB to do the first test to
transmit what I found back to the display. Look at the pictures in
the German Story .
Quote:
I see you've also worked out what the commands all mean. Where did you get this info?
This is just a guess! I found a fragment of a documentation for a display
controller which first seemed to be similar to the real one , but the only
concurrence finally were the guessed commands. All other parameters
were different and not working.
Believe me, if I would own the documentation of the controller on
the display, I would not use this way to program the 7650 display. It really limits
extremely a good use of that pretty nice and cheap display.