LCDInfo.com
http://forum.lcdinfo.com/

Problems with a Nokia 3310 LCD
http://forum.lcdinfo.com/viewtopic.php?f=6&t=10059
Page 1 of 1

Author:  nigelmercier [ Sun Feb 12, 2012 1:07 ]
Post subject:  Problems with a Nokia 3310 LCD

I'm having problems with a Nokia 3310 LCD. I can get it working no problem, but I've twice built a device using this module, and for the second time the display died after several hours, failing to come on after a power down.

[Later] the LCD has come back to life, possibly after a power cycle (but I'm not sure, someone else is using it).

I'm using 3.3V as the power source and pairs of 4k7/10k dropper resistors from the 5V PIC outputs. The code goes through the normal LCD init sequence as widely published.

Any suggestions on how to fix this?

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/