LCDInfo.com http://forum.lcdinfo.com/ |
|
Problem with Noritake 311 VFD http://forum.lcdinfo.com/viewtopic.php?f=6&t=1049 |
Page 1 of 1 |
Author: | herbgrow [ Sat Feb 12, 2005 3:50 ] |
Post subject: | Problem with Noritake 311 VFD |
Hello all. I just bought the Noritake Gu128x32 311 lcd and I have a problem with my ground pin. I know that if you short pin 2 to ground the VFD should go through a selftest. The problem is that the display go trough selftest just by connecting pin 3 (ground) I don´t have to short pin 2. Please help me!! |
Author: | Henri [ Sat Feb 12, 2005 12:17 ] |
Post subject: | |
Do you have anything connected to the data connector ? Just that as you have the selftest pin also in the data connector you aren't accidentally shorting it to ground there ? |
Author: | herbgrow [ Sat Feb 12, 2005 14:19 ] |
Post subject: | |
No, just power and ground are connected. Do you know wich pin in the data connector that is the selftest pin? |
Author: | Henri [ Wed Feb 16, 2005 0:37 ] |
Post subject: | |
Looks like I remembered wrong. This display doesn't seem to have the self test pin in the data connector at all like some other Noritake displays. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |