LCDInfo.com

http://www.lcdinfo.com
It is currently Thu Nov 21, 2019 6:24

All times are UTC + 2 hours




Post new topic Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Tue May 25, 2004 15:05 
Offline

Joined: Tue May 25, 2004 15:00
Posts: 1
I have a Nokia 2280(CDMA), n wanted to connect its LCD to paralell port. Can someone please help with the controller used in this LCD or any working circuit.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jun 04, 2004 0:22 
Offline

Joined: Wed May 19, 2004 5:19
Posts: 7
Location: Wellington, New Zealand
Go here for 2280 Service Manual

http://www.aussattv.oranged.to

That will give you pin outs and applicable voltages
Volts IO = 1.8v
Volts to power LCD 2.78v

Schematic calls out LCD as DMS03214 but this may be a dead end if it is a nokia reference number.

The controller part is harder if you cannot read it from the device on the LCD assy.

This LCD is 96x65 and also used in Nokia 3510. If you discover the controller type, please post it back here.

All the best.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Apr 18, 2006 19:04 
Offline

Joined: Tue Apr 18, 2006 18:58
Posts: 2
Location: Florianópolis / SC - Brasil
Hi, all.

The link above is broken.
Has someone any information about the Schematic e controller of nokia 2280 lcd?


Top
 Profile  
 
PostPosted: Wed Apr 19, 2006 12:04 
Offline

Joined: Wed May 19, 2004 5:19
Posts: 7
Location: Wellington, New Zealand
Yuri wrote:
Hi, all.

The link above is broken.
Has someone any information about the Schematic e controller of nokia 2280 lcd?




Yes it broken. At least for now.

You may have luck here http://forum.gsmhosting.com/vbb/showthread.php?t=176586

Looks like you need to load down multple RAR files. Should add up to around 6.6MB


Top
 Profile  
 
 Post subject:
PostPosted: Wed Apr 19, 2006 16:44 
Offline

Joined: Tue Apr 18, 2006 18:58
Posts: 2
Location: Florianópolis / SC - Brasil
Moa,

Thank You by answering me.
I downloaded all docs and just found few informations about the LCD:

" RH-17 uses a 96x65 monochrome display. Dimensions for the display are 38.4 mm x 37.6 mm x 1.6 mm, with an active area of 31.15 mm x 24.78 mm. "
" LCD is controlled by UI SW and control signals.
Booster capacitor ( C302 1 uF ) is connected between booster pin ( Vout ) and griund. The capacitor stores boosting voltage."

Nothing more. I was thinking that the 3310 LCD and 2280 LCD was the same model, but the resolution is different. Does anyone know if the pinout is the same for both models? ( nokia 2280 has 8 pins ) The 2280 LCD it looks like the 3310 LCD very close.

Thanks all!


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 06, 2007 22:28 
Offline

Joined: Sun Feb 11, 2007 16:53
Posts: 4
Moa wrote:
This LCD is 96x65 and also used in Nokia 3510.


Nokia 3510 LCD Pinouts: http://sandiding.tripod.com/ni3510.html ;)


Top
 Profile  
 
 Post subject:
PostPosted: Sun Mar 29, 2009 3:30 
Offline

Joined: Sun Mar 29, 2009 3:27
Posts: 1
Here are the connections on the pcb side:
http://code.rancidbacon.com/images/nokia2280lcdcv1.jpg


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group