| LCDInfo.com http://forum.lcdinfo.com/ |
|
| epson eg9011d nz 3 help? http://forum.lcdinfo.com/viewtopic.php?f=6&t=1251 |
Page 1 of 1 |
| Author: | BB mod's [ Sat Jul 02, 2005 6:43 ] |
| Post subject: | epson eg9011d nz 3 help? |
Yea im now a lcd/vfd freak..thank's to you all  i got this lcd out of a old lappy that was given to me the other day model # again is epson eg9011d nz 3 the back light is 12v and i confirmed it's working order,now..how the heck do i controll it?If ya need a pic of it lmk and ill get it.
|
|
| Author: | BB mod's [ Sat Jul 02, 2005 21:41 ] |
| Post subject: | |
Any one care to take a shot here? |
|
| Author: | coorz [ Sat Jul 02, 2005 23:07 ] |
| Post subject: | |
Laptop LCD's (640x480 and up) are normally hard to control, they require a relatively expensive controller and can't be hooked up to LPT. It'll just be another monitor. LCD's up to 640x256 can be controlled by SED 1335 but you 'll need the datasheet to be sure. |
|
| Author: | BB mod's [ Sat Jul 02, 2005 23:10 ] |
| Post subject: | |
EDIT i got confused with my sony's lcd..im unsure of this unit's size but it's out of a old IBM lappy |
|
| Author: | BB mod's [ Mon Jul 04, 2005 3:45 ] |
| Post subject: | |
Any help here? Link's? i have been looking for 3 day's solid |
|
| Author: | Henri [ Mon Jul 04, 2005 13:03 ] |
| Post subject: | |
So would you like to control it with the graphical lcd software like LCDInfo for example ? In that case I don't think there's anything for you just now. But I'm working on something that should make it possible to use this kind displays too. |
|
| Author: | BB mod's [ Tue Jul 05, 2005 3:29 ] |
| Post subject: | |
No ide like to use a pci graphix card to use the lcd...i need a vga controller |
|
| Author: | BB mod's [ Mon Jul 11, 2005 18:11 ] |
| Post subject: | |
Bump |
|
| Author: | coorz [ Mon Jul 11, 2005 19:22 ] |
| Post subject: | |
http://www.dr-berghaus.de/frame_start.html Or EIO or EarthLCD in the USA. Still need datasheet to determine whcich VGA controller is suitable. |
|
| Author: | BB mod's [ Wed Jul 13, 2005 6:03 ] |
| Post subject: | |
I still cant get the darn data sheet..some one here has to know something about this lcd 
|
|
| Author: | Myscha [ Sat Jul 16, 2005 11:06 ] |
| Post subject: | |
On the following page an EG9011DNZ3 is listed. It seems that you can buy the controller and inverter there. Perhaps you can also ask for the datasheet... http://earthlcd.com/IhavethisLCD.htm |
|
| Author: | BB mod's [ Sat Jul 23, 2005 1:52 ] |
| Post subject: | |
Tried that,..they wont e mail me back! |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|