LCDInfo.com

http://www.lcdinfo.com
It is currently Fri Jul 05, 2024 14:22

View unanswered posts | View active topics


Board index » General display discussion » Hardware

All times are UTC + 2 hours




Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
d-frag-r
PostPosted: Fri Jul 08, 2005 18:53 
Offline

Joined: Tue Jun 14, 2005 23:13
Posts: 29
Location: Toronto, Canada
I've dug out this old Compaq video card and from what I can tell it uses an S3 ViRGE/GX chip [ 86C385 ]. It has an onboard 'Feature' [ VESA ] connector... but what I find odd is that there is a 79-pin connector [ at the top of the board ] with traces that come straight from the top-half of the chip, and a 79-pin port [ at the bottom of the board ] that connects with the right face of the chip.

This is really baffling... google didn't come up with anything.

Could this port eliminate an LVDS driver board? I read on a Dutch site that some LVDS LCDs could use the VESA port.


The card uses PCI and has 2MB VRAM. I'll try to do some ASCII art of it and post later.
Top
 Profile  
 
coorz
 Post subject:
PostPosted: Fri Jul 08, 2005 20:46 
Offline
User avatar

Joined: Sat Apr 17, 2004 17:42
Posts: 467
Location: The Netherlands
A pre-historic SLI setup 8O

_________________
My Plexeon-Insane LCD!-Or this one!-LCDinfo-LCDStudio
Top
 Profile  
 
d-frag-r
PostPosted: Sat Jul 09, 2005 0:29 
Offline

Joined: Tue Jun 14, 2005 23:13
Posts: 29
Location: Toronto, Canada
d-frag-r wrote:
I find odd is that there is a 79-pin connector [ at the top of the board ] with traces that come straight from the top-half of the chip, and a 79-pin port [ at the bottom of the board ] that connects with the right face of the chip.

I'll try to do some ASCII art of it and post later.


Code:
__
  |
  |
  |
  |________________________________________________________________
  |                                                                |
  |        .............             ....................          |
  |        .............             .... ...............          |
  |                                  ....................          |
  -                                  ....................          |
                                                   Pins            |
 VGA                                                               |
                                         ___    ___                |
  -                                     |   |  |   |               |
  |                      ________       |   |  |   |  << VRAM      |
  |                     |        |      |   |  |   |               |
  |                     |        |      |___|  |___|               |
  |                     |  GPU   |                                 |
  |       ^^^           |        |                    Socket       |
  |   s'more stuff      |________|         ....................    |
  |                                        .... ...............    |
  |                                        ....................    |
  |                                        ....................    |
  |                                                                |
  |_______     _                          _     ___________________|
  |       ||||| |||||||||||||||||||||||||| |||||
  |
  |
Top
 Profile  
 
d-frag-r
PostPosted: Tue Jul 12, 2005 5:31 
Offline

Joined: Tue Jun 14, 2005 23:13
Posts: 29
Location: Toronto, Canada
d-frag-r wrote:
S3 ViRGE/GX chip [ 86C385 ]



Anyone at least have a spec sheet for this GPU?
Top
 Profile  
 
zapro
PostPosted: Sun Sep 04, 2005 2:01 
Offline

Joined: Mon Sep 20, 2004 17:28
Posts: 12
d-frag-r wrote:
Could this port eliminate an LVDS driver board? I read on a Dutch site that some LVDS LCDs could use the VESA port.


The card uses PCI and has 2MB VRAM. I'll try to do some ASCII art of it and post later.


Dude, that's socket & pins for an Memory expansion module for example 2 Megabytes of extra RAM. Matrox and some older ATI cards are made the same way, you cannot use these connectors for anything other than RAM expansion, sorry.

Regards, Per.
Top
 Profile  
 
d-frag-r
 Post subject:
PostPosted: Mon Sep 05, 2005 20:38 
Offline

Joined: Tue Jun 14, 2005 23:13
Posts: 29
Location: Toronto, Canada
Thanks, mate.

Good to know.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » General display discussion » Hardware

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 17 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group