i Found my old 5210 any one has any idea where i could find specks for this display?
i used google but couldt find anything use full
| LCDInfo.com http://forum.lcdinfo.com/ |
|
| nokia 5210 http://forum.lcdinfo.com/viewtopic.php?f=6&t=1402 |
Page 1 of 2 |
| Author: | Piilukirves [ Wed Nov 02, 2005 21:06 ] |
| Post subject: | nokia 5210 |
i Found my old 5210 any one has any idea where i could find specks for this display? i used google but couldt find anything use full
|
|
| Author: | Piilukirves [ Wed Nov 02, 2005 21:15 ] |
| Post subject: | |
and i found these from phone DF7_06 9854572 somethink like "A" and "S02" and smol "27b" (AS0227b) R394V-0 |
|
| Author: | Piilukirves [ Thu Nov 03, 2005 18:53 ] |
| Post subject: | |
Any one any help?? |
|
| Author: | gsmaster [ Thu Nov 03, 2005 23:59 ] |
| Post subject: | |
I've read, that the display is the same with other nokia's, but the result is reflected. |
|
| Author: | dantasasd_28 [ Fri Nov 04, 2005 1:23 ] |
| Post subject: | |
I've been looking for informations about nokia displays for a long time, and What I found is that all uses the same controller (PCD8544) and the PN is LPH7366 for some Nokia display. There are lots of projects with them. http://sandiding.tripod.com/Bertys.html http://rifer.narod.ru/usblcd.html |
|
| Author: | mrwastl [ Fri Nov 04, 2005 1:51 ] |
| Post subject: | |
according to the data sheet your display seems to be a LPH7779/7677 compliant one (8 pins) @dantasad_28: lph7366 has 9 pins ... but all of these are driven by the same controller (pcd8544 or compliant) /mrwastl |
|
| Author: | Piilukirves [ Fri Nov 04, 2005 15:34 ] |
| Post subject: | |
DAM im soooo confused 
im not wery fimiliar whit these ports and pins, and i hawe so poor english
is LPT = 25pin printer port? |
|
| Author: | mrwastl [ Fri Nov 04, 2005 17:15 ] |
| Post subject: | |
where did you read LPT? LPH != LPT LPH7779, ... are model names. if you would have read some of the existing projects you would have read about those different model names. some urls: (dantasasd_28 already posted a link to Bertys pages): http://sandiding.tripod.com/lcd.html my own project: http://serdisplib.sourceforge.net (use http://serdisplib.sourceforge.net/ser/pcd8544.html for your display) and many others (some are listed in the page above) /mrwastl |
|
| Author: | Piilukirves [ Sat Nov 05, 2005 11:32 ] |
| Post subject: | |
http://sandiding.tripod.com/lcd.html <-- end of that pake says "Lpt port connectivity" And link goes to.... HERE ----> http://serdisplib.sourceforge.net/ser/pcd8544.html Can i use that wiring?? if not, any of u hawe direct wiring quide and now i read those links
|
|
| Author: | gsmaster [ Fri Nov 18, 2005 1:19 ] |
| Post subject: | |
NOKIA 5210 pinout tested 
inverted display can be seen in a digital clock application. Perhaps Henry could add a modified driver for these displays, so they can be used with LCDinfo. |
|
| Author: | Piilukirves [ Tue Nov 22, 2005 17:45 ] |
| Post subject: | |
DAM i all ready left that project and ordered 2x16 lcd .
http://www.bebek.fi/kauppa/tuotekuvat_u ... 0a00d7.jpg and i would realy like to see those picks but they wont load up. edit. server was down i ques. |
|
| Author: | Piilukirves [ Tue Nov 22, 2005 22:00 ] |
| Post subject: | |
i thinked that i could use 2 LCD, so i started to selder first but noticed that i cant do it
So pin out goes like? RES => LPT pin 4 Vout => LPT pin ? GND => LPT pin ? CS => LPT pin ? D/C => LPT pin 6 SDA => LPT pin 3 SCL => LPT pin 2 VDD => LPT pin ? i all ready soldered those so i hope that is ok.
|
|
| Author: | Zee [ Tue Nov 22, 2005 22:47 ] |
| Post subject: | |
With LCDInfo you can use whatever pins from the LPT datalines (2-9) and then set the same pins in LCDInfo. You also need to connect a small capacitor (ceramic or polyester) between the VOUT & CS pins and the CS pin also to GND. For example: RES => LPT 4 GND => LPT 18-25 D/C => LPT 6 SDA => LPT 3 SCL => LPT 2 VDD => LPT 9 (to be safe you could put a diode between VDD & LPT pin 9, the stripe facing away from the LPT port.) VOUT => capacitor => CS CS => GND |
|
| Author: | Piilukirves [ Wed Nov 23, 2005 19:13 ] |
| Post subject: | |
i just soldered alll those and nothing ? hawe i some think to remember? |
|
| Author: | Zee [ Wed Nov 23, 2005 22:33 ] |
| Post subject: | |
Propably doesn't work because the PCD8544-driver in LCDInfo is for a different model. Unless someone writes a new one. |
|
| Page 1 of 2 | All times are UTC + 2 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|
