LCDInfo.com
http://forum.lcdinfo.com/

Optrex DMF5005N- LY 240*64 just beeing black
http://forum.lcdinfo.com/viewtopic.php?f=6&t=151		 Page 1 of 1
Author:  bc547c [ Mon Feb 24, 2003 19:36 ]
Post subject:  Optrex DMF5005N- LY 240*64 just beeing black
I got an Optrex Display. I wired it and saw there are to possibilities. You call them the normal and the tweakers I think. Well, for the Voltages I took +5 and -12 from the ATX-PowerSupply. The Datasheet says 0 to -27Volts are ok, so i desired taking the -12V without any resistors. When first connecting the Power to the Display all pixels have been getting black, so I first was happy that it works. But then when I tried to use any tools, nothing changed. And it's still black. :cry: Is it ok, that it is black when connecting the power, and what could be wrong. I also checked both wiring methods, and I don't think I did something wrong, but I'll now check it one more time

If anyone could help me :roll:

My config is WinME German and I also installed the portDrivers, but I'll now install Win98 SE.

So far and thx for your answers and sorry for the mistakes

klauz
Author:  Henri [ Mon Feb 24, 2003 20:59 ]
Post subject: 
Sounds like you might have too much contrast.

You might want to check this: http://zapour.student.utwente.nl/schijf ... .php?t=105
Author:  bc547c [ Tue Feb 25, 2003 0:29 ]
Post subject:  Juuhuuuuuuu
Oh, thx so much.
I've already been afraid of having broken it.
It's working perfectly.

:P thx :P

yeah
greets to all
klauz

:D
Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/