LCDInfo.com
http://forum.lcdinfo.com/

How to connect the lcd to my pc?
http://forum.lcdinfo.com/viewtopic.php?f=6&t=2130		 Page 1 of 1
Author:  D0r0n [ Fri Jan 26, 2007 20:24 ]
Post subject:  How to connect the lcd to my pc?
first sorry about double posting... this is the right place :D

i have Toshiba TLX-5156S-C3M lcd
have this lcd without any cables
how can i plug him into my pc?

here some photos
http://members.lycos.nl/robbyentommy/fo ... 01.JPG.JPG
http://members.lycos.nl/robbyentommy/fo ... 02.JPG.JPG
(i have no cables....)
http://members.lycos.co.uk/sbazel/PC/Image(033).jpg
http://members.lycos.co.uk/sbazel/PC/Image(032).jpg
http://members.lycos.co.uk/sbazel/PC/Image(031).jpg

there is 15 pin set and 3 pin set....

Where to should i connecnt this
i have ob video card...
tnx m8s
Author:  Michael [ Sat Jan 27, 2007 13:06 ]
Post subject: 
A quick google tells me this is a colour STN LCD (could be wrong), and going by the pictures it doesn't contain an onboard controller, so this can't directly connect directly to the PC, at least not without an external controller.

Whenever there is a request for help or advice it is always best to supply as much information as can be gained, sometimes a close-up image of the PCB is enough. eg; If there are IC's then list how many and the writing on each. If in reference to the LCD then list LCD type, origin, number of pixels (WxH), colour(s), backlight type, voltages, etc..
Author:  D0r0n [ Sat Jan 27, 2007 18:51 ]
Post subject: 
k tnx man
and sorry 4 my ban english.
that all the details i have about this lcd.. sry if it's no enough.
i know that it came from old laptop.

Is there any way to connect it to normal video card?
good day
Author:  Henri [ Tue Jan 30, 2007 21:03 ]
Post subject: 
D0r0n wrote:
Is there any way to connect it to normal video card?
good day

Without some additional controller / logic circuitry (be it discrete logic, fpga, cpld or something) / some other way to adapt the interfaces, not really.

So probably not very cost efficient to try getting your display to work with normal video card.
Author:  D0r0n [ Thu Mar 29, 2007 18:22 ]
Post subject: 
When i connect the 2 and the 16 pin i think to 12V, the lcd turn on!
so now maybe i can conncect that?
will this help me:
Image
?

TNX :roll:
Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/