| LCDInfo.com http://forum.lcdinfo.com/ |
|
| Help! Newbie Needs Help Connecting 3310 http://forum.lcdinfo.com/viewtopic.php?f=6&t=2179 |
Page 1 of 1 |
| Author: | MadModder [ Mon Mar 26, 2007 10:33 ] |
| Post subject: | Help! Newbie Needs Help Connecting 3310 |
I have a Nokia 3310 lcd screen. I saw this mod online and want to do it as well. I am not sure where to begin. Can someone help me? |
|
| Author: | _Lone_Wolf_ [ Mon Mar 26, 2007 16:54 ] |
| Post subject: | |
sure, there is a schematic somewhere around here, or I may post here the one I used on one of mine, I just need to find it, or else I will have to go check and draw it again. |
|
| Author: | MadModder [ Mon Mar 26, 2007 17:33 ] |
| Post subject: | |
thanks, but I am truly a noob. I have no experience in reading schematics nor do I understand them. I would need to know the required hardware, step by step wiring, programming/configuring to get the screen up and running. |
|
| Author: | _Lone_Wolf_ [ Mon Mar 26, 2007 18:26 ] |
| Post subject: | |
Here you can find a schematic: LINK This is the one i used on mine: LINK on mine the pins are numbered the same way the first link C1 and C2 are two capacitors the values are on the image, and these have polarity on the capacitor the minus is marked with a stripe. the D1 is a diode it has a black line on one of the side this indicates the cathode, in the schematic it is indicated by the line where the arrow is pointing. I hope this was clear enough for you to work on it, any more questions, just ask |
|
| Author: | MadModder [ Mon Mar 26, 2007 21:37 ] |
| Post subject: | |
why does one link have 7 diodes..and the other has 1? |
|
| Author: | _Lone_Wolf_ [ Mon Mar 26, 2007 23:35 ] |
| Post subject: | |
To be honest I dont know why, I never used the first one, the second one works for me but according to some sources the first also works |
|
| Author: | MadModder [ Mon Mar 26, 2007 23:47 ] |
| Post subject: | |
it may seem dumb but, is the wiring as easy and simple as the diagram...meaning...if i wire the lcd to the parallel port like shown...then thats all i would need to do to hook it up to a pc? what program would i need to display a picture or text? |
|
| Author: | _Lone_Wolf_ [ Tue Mar 27, 2007 0:47 ] |
| Post subject: | |
software you can use LCDInfo available here http://forum.lcdinfo.com/viewtopic.php?t=387&start=15 |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|