| LCDInfo.com http://forum.lcdinfo.com/ |
|
| epson r320 lcd http://forum.lcdinfo.com/viewtopic.php?f=6&t=2243 |
Page 1 of 1 |
| Author: | xkuco [ Tue May 29, 2007 17:17 ] |
| Post subject: | epson r320 lcd |
hey how u guys doing im trying to do a project with this lcd screen i took of a epson r320 printer i called the company and other parts retailers and cant find the part number to find out if u guys have done anything with it. i toke some pictures of it to see if u guys can identify it. 
plz help im trying to configure this and get it to work.. the second pic is the board that was on back of the lcd and the last was attached to the first board and the printer thanks ahead of time |
|
| Author: | xkuco [ Wed May 30, 2007 1:16 ] |
| Post subject: | bump |
anybody???? bump bump bump |
|
| Author: | xkuco [ Thu May 31, 2007 19:38 ] |
| Post subject: | |
ok i found this out about it i used a multimeter and te little bit of knowledge i know about this stuff plz help out people Pin 1: 5v Pin 2: 3.25v led Pin 3: grnd Pin 4: 3.25v led Pin 5: ? Pin 6: ? Pin 7: 1.10v Pin 8: grnd Pin 9: 1.25v im guessing pins 5 and 6 are h and v sync so what are 7 and 9 at 1.10v and 1.25v ????? and also can i hook this up to a vga connecter and get it working any help appriciated |
|
| Author: | xkuco [ Sat Jun 02, 2007 2:10 ] |
| Post subject: | |
bump bump bump bump bump bump anyone!!!! |
|
| Author: | xkuco [ Wed Jun 06, 2007 18:45 ] |
| Post subject: | |
bump |
|
| Author: | Henri [ Thu Sep 06, 2007 20:15 ] |
| Post subject: | |
Looks like you have a controller to match the display but unfortunately that seems to be some Epson proprietary IC so there's no documentation available for it. So it's difficult to know how to communicate with it. Using a logic analyzer it might be possible to figure out how it works if you're able to listen to a working system. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|