| LCDInfo.com http://forum.lcdinfo.com/ |
|
| Information about Nokia 9210 outer display http://forum.lcdinfo.com/viewtopic.php?f=6&t=2343 |
Page 1 of 1 |
| Author: | mrnice [ Wed Oct 10, 2007 12:15 ] |
| Post subject: | Information about Nokia 9210 outer display |
Hi, i need some information about the outer display of the Nokia 9210 Communicator. I read, that an Epson EM4502 Controller-based LCD was used. But i can't find a datasheet of it. Otherwise an pcd8544-based display was used in the Nokia 9110. Anyway, if you can supply information (even negative one, aka "this display was not used") i would really appreciate that. Thank you. |
|
| Author: | mrnice [ Wed Oct 10, 2007 17:26 ] |
| Post subject: | |
Hi, ok it seems to be PCD8544-based. But when i issuing the "all display segments on"-command (0x09, means D=0, E=1) every second line stays blank. This happens also when i write regular data to the display. Any suggestion what causes this effect are appreciated. Thank you. |
|
| Author: | mrnice [ Wed Oct 10, 2007 19:19 ] |
| Post subject: | |
Hi, adding a 100nF cap between Vout and GND and Vcc and GND respectively solved the blank-line-problem. Does anybody know if there are suitable libraries for driving the LCD with a FTDI TF2322D Dual USB UART out there? |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|