LCDInfo.com
http://forum.lcdinfo.com/

SHARP LM089HB1T07 (Toshiba Xero) help
http://forum.lcdinfo.com/viewtopic.php?f=6&t=2413
Page 1 of 1

Author:  profesorx [ Tue Feb 19, 2008 20:46 ]
Post subject:  SHARP LM089HB1T07 (Toshiba Xero) help

Is there a possibility to attach this lcd display to pc to work with lcdinfo ?


Image


Image


Image


Image


Image


Image

Author:  Henri [ Wed Feb 20, 2008 12:02 ]
Post subject: 

Looks like you have the working hardware there available that drives the display in that one picture ?

Do you have an oscilloscope available to check the signals ? That way you should be able to find out the signals from the working equipment.

Look for example at this post:
http://forum.lcdinfo.com/viewtopic.php?p=7675#7675
Your display should use signals that are something similar. Then the power supply and VEE voltages you can measure with a multimeter.

After you have the signals figured out you could use something like the USB13700 controller as a controller: http://forum.lcdinfo.com/viewtopic.php?t=2358

Author:  profesorx [ Wed Feb 20, 2008 15:12 ]
Post subject: 

ok thanks for the info.

this picture of working lcd are from other working machine (this is not this lcd as we talk about)

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/