Is there a possibility to attach this lcd display to pc to work with lcdinfo ?
| LCDInfo.com http://forum.lcdinfo.com/ |
|
| SHARP LM089HB1T07 (Toshiba Xero) help http://forum.lcdinfo.com/viewtopic.php?f=6&t=2413 |
Page 1 of 1 |
| Author: | profesorx [ Tue Feb 19, 2008 20:46 ] |
| Post subject: | SHARP LM089HB1T07 (Toshiba Xero) help |
Is there a possibility to attach this lcd display to pc to work with lcdinfo ?
|
|
| Author: | Henri [ Wed Feb 20, 2008 12:02 ] |
| Post subject: | |
Looks like you have the working hardware there available that drives the display in that one picture ? Do you have an oscilloscope available to check the signals ? That way you should be able to find out the signals from the working equipment. Look for example at this post: http://forum.lcdinfo.com/viewtopic.php?p=7675#7675 Your display should use signals that are something similar. Then the power supply and VEE voltages you can measure with a multimeter. After you have the signals figured out you could use something like the USB13700 controller as a controller: http://forum.lcdinfo.com/viewtopic.php?t=2358 |
|
| Author: | profesorx [ Wed Feb 20, 2008 15:12 ] |
| Post subject: | |
ok thanks for the info. this picture of working lcd are from other working machine (this is not this lcd as we talk about) |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|