LCDInfo.com http://forum.lcdinfo.com/ |
|
Help with MGLS240128T (T6963c) http://forum.lcdinfo.com/viewtopic.php?f=6&t=277 |
Page 1 of 1 |
Author: | Gralov [ Fri Jul 04, 2003 18:08 ] |
Post subject: | Help with MGLS240128T (T6963c) |
Hello! i've been looking everywhere for a schematic to connect my 240x128 graphical LCD to my parallellport it's controller is the toshiba T6963c chip and here is the datasheet for the lcd! http://www.swcab.nu/pdf/L240128.pdf the pinouts are: 1: FG (Frame Ground) 2: Vss 3: Vdd (+5V) 4: V0 5: WR 6: RD 7: CE 8: C/D 9: RESET 10: DB0 11: DB1 12: DB2 13: DB3 14: DB4 15: DB5 16: DB6 17: DB7 18: FS can anyone please draw me a schematic or maby post a link to one! |
Author: | rille [ Sat Jul 05, 2003 0:28 ] |
Post subject: | |
Have a look here: http://mitglied.lycos.de/grafiklcd/. But it's in German. The direct link to the schematic is http://mitglied.lycos.de/grafiklcd/bilder/schaltplan_varitronix.png. It works. I tested it with the same LCD. You should change the value of R14, it's for the background light. You should use 22 Ohm. |
Author: | Gralov [ Sat Jul 05, 2003 3:51 ] |
Post subject: | |
rille wrote: Have a look here: http://mitglied.lycos.de/grafiklcd/.
But it's in German. The direct link to the schematic is http://mitglied.lycos.de/grafiklcd/bilder/schaltplan_varitronix.png. It works. I tested it with the same LCD. You should change the value of R14, it's for the background light. You should use 22 Ohm. where did you get the components? |
Author: | rille [ Sat Jul 05, 2003 10:54 ] |
Post subject: | |
Gralov wrote: rille wrote: Have a look here: http://mitglied.lycos.de/grafiklcd/. But it's in German. The direct link to the schematic is http://mitglied.lycos.de/grafiklcd/bilder/schaltplan_varitronix.png. It works. I tested it with the same LCD. You should change the value of R14, it's for the background light. You should use 22 Ohm. where did you get the components? At Reichelt (http://www.reichelt.de), it's a german shop. |
Author: | Henri [ Sun Nov 30, 2003 18:49 ] |
Post subject: | |
Site moved: http://www.grafiklcd.de.vu/ |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |