LCDInfo.com
http://forum.lcdinfo.com/

[KS0108 128x64]Only a part of the display shows program data
http://forum.lcdinfo.com/viewtopic.php?f=6&t=320		 Page 1 of 1
Author:  freezer90 [ Thu Aug 21, 2003 14:52 ]
Post subject:  [KS0108 128x64]Only a part of the display shows program data
Hi!

i've wired my lcd just like the guides and plans i've found on this homepage. now i have the problem, that the display works not in "fullscreen" only a part shows data from the program.

i drawed it fast for better understanding *G*
Image

so in the upper right part you can see a litte part of the actual screen (on the pic are some dots :roll: )
now i can't find a mistake. i've checked all cabels if every contact is right - nothing found. also the potentiometer and the backlight runs without problems.

so i hope you understand my problem and could help me!

THX

freezer90

PS: sorry for my bad english ;)
Author:  Henri [ Fri Aug 22, 2003 12:05 ]
Post subject: 
Have you tried other LPT port settings in BIOS ? ECP/EPP often works fine but testing others shouldn't hurt.

Bad signal quality and wrong timing causes problems like this. For some rewiring everything with different cable has helped.
Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/