LCDInfo.com

Hi,
I got a PCB with a LCD on it cheaply from ebay, it is probably 4*16 or 4*20 alphanumeric, but i can't tell for sure since i don't want to power it up without knowing where the power lines are...
It is a PCB with 4 ICs: two T6A92 drivers, one T6A08 and one 74HC32(which is rather unimportent, i think; a quad or gate). There are two cables to the board, one 16 lines and one 7 lines; there is an additional 10 pin connector. The whole board has the name "AJ2/AN2 OPE LCD PCB", made in japan, below the number "TI1-9119-A BETW001"
I hope someone can help me out,
Sebastian

Hi!
I have also got such a PCB. I have got it from an old laser printer. I don't remember which model.... If you have got any information about it, I would be happy if you could mail me a copy! )) I normally don't read this forum, so please mail it to skontorp@tmvs.vgs.no
Karl Jan