LCDInfo.com

http://www.lcdinfo.com
It is currently Thu Mar 28, 2024 9:12

All times are UTC + 2 hours




Post new topic Reply to topic  [ 13 posts ] 
Author Message
PostPosted: Fri Sep 12, 2003 18:44 
Hi
Does someone is using or have specs for this lcd
It is a 640x200 graphical. I have running wave forms and frequencies of this lcd. It came from a old working vt220 terminal.

In searching of specs i have found thoses supposed equivalents

Hitachi lm236xb or LM674xn ???
Sharp LM64032w or LM64032m ???
Epson EG7005s-ar or EG7005-er ???
Samsung UG-64e_02snbr or UG-64e-02sebt

BUT i have not found any specs for the listed ....


Top
  
 
 Post subject:
PostPosted: Sun Sep 14, 2003 19:09 
Offline

Joined: Sun May 05, 2002 22:05
Posts: 2063
Location: Lappeenranta, Finland
I think the hardware from the equipment it's taken from might help or at least give hints how to use the lcd.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Sep 15, 2003 15:14 
Well i have the terminal where the lcd came from, the sad thing is the lcd controller is a hard one to find specs too. And the terminal was fabricated in 1989 i think ??? Even Texas Instruments doesn't remember it ...


Top
  
 
 Post subject:
PostPosted: Wed Sep 17, 2003 22:44 
yepeeee i've finded thoses infos


Top
  
 
 Post subject: dmf651
PostPosted: Wed Oct 15, 2003 12:16 
hi
i am looking for a module for an old Dawn100 termonal
is it in good condition
if so i may be intertested in buying it from you

am also interested in the specs
vinodp


Top
  
 
 Post subject:
PostPosted: Mon Oct 20, 2003 1:17 
Hi
I have dismantled the terminal only to keep the lcd and the switching supply

sorry


Top
  
 
 Post subject: DMF651
PostPosted: Thu Oct 23, 2003 13:03 
I have the same LCD-module, and I am looking for specs. Can you please tell me where you found yours?

Regards,
Andreas Nilsson


Top
  
 
PostPosted: Tue Dec 23, 2003 15:05 
Offline

Joined: Tue Dec 23, 2003 14:56
Posts: 1
hi, everybody
i have same kind of LCD with you. so please tell me where to get the data sheet on it. and some application notes are aprreciated.
happy christamas :P


Top
 Profile  
 
PostPosted: Tue Jun 01, 2004 20:30 
Offline

Joined: Tue Jun 01, 2004 20:23
Posts: 1
Location: India
I have a similar problem, I have an EPSON EG7005S-AS, require data sheet. Kindly let me know where you found them.

Regards
KSPatill


Top
 Profile  
 
 Post subject: dmf-651a
PostPosted: Thu Apr 20, 2006 22:08 
Offline

Joined: Fri Sep 12, 2003 18:35
Posts: 4
i have this display, i recovered it from an old vt-100 terminal made by texas instruments, the funny thing about it, they dont remember this model ??? CA and UL approved ??? .

it is a 640x200 dots with a 1/200 duty cycle

pins
1: FLM or (YD) frame signal
2: LP data latch signal
3: CP clock signal
4: M alternate signal for lcd drive

5: vadj contrast (-14 to -21v), -14v = nothing, -21v = all dark pixels
6: +5 volts
7: ground
8: VEE -21volts lcd drive supplys

9: XD0
10: XD1
11: XD2
12: XD3
13 to 18: not used
19 -20: optional backlight

the frequencies mesured in the vt-100 terminal where :
pin 1 = 77.63 hz (15.5265 / 200)
pin 2 = 15.5265 khz
pin 3 = 3.074 mhz
pin 4 = 38.82 hz (77.63 / 2)

im running this panel with a sed1335-32k from mpi web 2000
and two dc-32 converters from allelectronics. All wired to use a LPT port.
But the refresh rate is very low, if i push it faster the display comes garbled.

hope this help


Top
 Profile  
 
 Post subject:
PostPosted: Fri Apr 21, 2006 3:48 
Offline
User avatar

Joined: Thu Dec 09, 2004 16:01
Posts: 218
Location: NH, USA
Aside from the SED noise, how does it look? I think I might have one of these laying around, just havent had time to play with it yet.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Mar 29, 2008 4:38 
Offline

Joined: Fri Sep 12, 2003 18:35
Posts: 4
i've played with it, it worked well in text mode, but it was so slooooooooow in refresh rates, the display couldn't clear the preceding characters or images fast enough, the following one just superposed themselves on top of the others, after a few sec's the display was full of junk .....


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 17, 2008 18:04 
Offline

Joined: Sat Feb 02, 2008 20:44
Posts: 16
Have a look here:

http://forum.lcdinfo.com/viewtopic.php?t=2425

Its working well the the usb-controller.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group