| LCDInfo.com http://forum.lcdinfo.com/ |
|
| 240 x 64 Lcd from Solomon (HD61830) http://forum.lcdinfo.com/viewtopic.php?f=6&t=50 |
Page 1 of 2 |
| Author: | samtech [ Sun Nov 10, 2002 0:06 ] |
| Post subject: | 240 x 64 Lcd from Solomon (HD61830) |
Hi , i have recently found an 240 x 64 LCD from Solomon , the LCD has two problems , first is that i have no datasheet for it (asked Solomon to send it but till now i have no answer , as they don't have it directly on their site) , the model is LM7680SGR , also tried to get some more info on the net , but without luck maybe the pin outs are not as dificult to find without the datasheet (by folowing the processe in one off the forum links to get the pin Outs) , the bigger problem is this chip controler , it's an HD61830A00 , i've heard that this is some like compatible with the T6963c , so can this work with LCD info or is totaly incompatible. If someone knows anything about this display please send me a private message. SAmtech |
|
| Author: | Henri [ Sun Nov 10, 2002 11:15 ] |
| Post subject: | |
I don't think HD61830 is compatible with T6963C - I believe it's more like the controller in the 240x128 display Crystalfontz is selling (LC79..). I've been in contact with someone who has been working on code for HD61830 and I'm going to try adding HD61830 support to LCDInfo when he get's the code working. But I can't promise anything yet. One thing with the HD61830 is that while it has both text and graphics modes, only one of them can be used at a time. So if graphics is wanted it has to be used more like a KS0108 than T6963C. |
|
| Author: | samtech [ Sun Nov 10, 2002 18:40 ] |
| Post subject: | |
Thanks for saying me that 
So my option is to wait for it to be suported , if those guys from solomon send me the data sheet , it's almost passed a week and still nothing 
On it's back the LCD has 6 chips , 5 are LC7941 and the ohter is the hd61830 , the LCD hasn't got backlight , and for the rest of the circuit it seem to have the negative voltage generator built in, here are some pic of it. I think it is a 240 x 64 by it's size 
SAmtech ADMIN EDIT: pictures up again |
|
| Author: | Henri [ Mon Dec 09, 2002 10:14 ] |
| Post subject: | |
Have you heard anything from Solomon ? |
|
| Author: | samtech [ Mon Dec 09, 2002 20:34 ] |
| Post subject: | |
Nope anything yet
I tried with the email form in their site but it always gives an error , so i tried to contact the web master but no response till now , so basicaly i don't make a clue how to wire that lcd up (maibe when i have some time i'll folow teh Liquid MP3 guide to do it) Samtech |
|
| Author: | Henri [ Tue Dec 31, 2002 5:40 ] |
| Post subject: | |
I've just made a little test program for HD61830 controller. I don't have a display with this controller so I can't say anything if it works but if anyone with a display is interested please contact me. |
|
| Author: | samtech [ Wed Jan 01, 2003 20:34 ] |
| Post subject: | |
i would realy be interested , but since those guys from Solomon don't give me the datasheet and i don't have much time to try to figure out the pin outs for it , seam ll have to try to wait a some more ou try to get a newer model with this controler from another brand 
SAmtech PS: Happy new Year to ALL !!!! |
|
| Author: | Paulo [ Sat Feb 22, 2003 21:51 ] |
| Post subject: | HD61830A |
I have the datasheet for this lcd controller and I have a program that write to it. I did not got it function in graphics mode. I any one wants this datasheet, please email-me psilva@opensoftware-br.com |
|
| Author: | samtech [ Mon Feb 24, 2003 0:09 ] |
| Post subject: | |
Well after some time i had the oportunity to try to figure out the pinouts for this LCD. It has 20 pins This was what i got: 1 – GND 2 – power +5V 3 – V contrast ?? doubt 4 – RS 5 – R/W 6 – E 7 – DB0 8 – DB1 9 – DB2 10 – DB3 11 – DB4 12 – DB5 13 – DB6 14 – DB7 15 – CS 16 – Reset 17 – VLCD ??? Doubt 18 – N/C 19 – N/C 20 – N/C Now my problem is with the contrast voltages those two pins i don't realy know what they are , but they have to do with the contrast and negative voltage input's , the pin 3 conect to a transistor (the only one in the picture) it conect's to the base of it , so probably this is an input for the tension for the contrast that will drive the transistor , the other pin 17 also conects to the same transistor , to it's colector pin , there is also an alectrolitic capacitor that conect's it's positive pole to the ground and the negative pole to the same pin 17 , tha indicates tha this is a negative tension that passes here , the only boubt is if it is an input ou an output , has the LCD has two more chips near the main controler , it has an 74hc390 (Two BCD decade or bi-quinary counters) and an LA6324N operational amp the seams to be relatied to the transistor , so i don't realy know if this is an DC-DC inverter on an simple input (gessing if this is an output is easy , but if ir is an input wha is the tension for this pin and for the other ?? Samtech PS :If anyone has any software for this controler please send it to me for my email samtech@netcabo.pt So if anyone |
|
| Author: | krazy [ Sat Sep 20, 2003 20:36 ] |
| Post subject: | |
Henri wrote: I've just made a little test program for HD61830 controller. I don't have a display with this controller so I can't say anything if it works but if anyone with a display is interested please contact me.
Hi, Henri I´d like you to send me the softwares you have (ready or not) for HD61830... ´cause I have a LCD with this controler... and I don´t even know if it´s working well And I´d like to know if the "17" is for entrance or exit of negative tension ghostkrazy@yahoo.com.br ICQ: 62034578 |
|
| Author: | krazy [ Sat Sep 20, 2003 20:37 ] |
| Post subject: | |
Henri wrote: I've just made a little test program for HD61830 controller. I don't have a display with this controller so I can't say anything if it works but if anyone with a display is interested please contact me.
Hi, Henri I´d like you to send me the softwares you have (ready or not) for HD61830... ´cause I have a LCD with this controler... and I don´t even know if it´s working well And I´d like to know if the "17" is for entrance or exit of negative tension ghostkrazy@yahoo.com.br ICQ: 62034578 |
|
| Author: | Guest [ Wed Sep 24, 2003 17:28 ] |
| Post subject: | |
krazy wrote: Henri wrote: I've just made a little test program for HD61830 controller. I don't have a display with this controller so I can't say anything if it works but if anyone with a display is interested please contact me. Hi, Henri I´d like you to send me the softwares you have (ready or not) for HD61830... ´cause I have a LCD with this controler... and I don´t even know if it´s working well And I´d like to know if the "17" is for entrance or exit of negative tension ghostkrazy@yahoo.com.br ICQ: 62034578 HENRI?? help-me!!!! 
i´am brasilian... bad english!!! hehehe |
|
| Author: | Henri [ Tue Sep 30, 2003 17:41 ] |
| Post subject: | |
Anonymous wrote: krazy wrote: Hi, Henri I´d like you to send me the softwares you have (ready or not) for HD61830... ´cause I have a LCD with this controler... and I don´t even know if it´s working well And I´d like to know if the "17" is for entrance or exit of negative tension ghostkrazy@yahoo.com.br ICQ: 62034578 HENRI?? help-me!!!! i´am brasilian... bad english!!! hehehe Just a reminder for myself that I've replied by email and sent the test software. |
|
| Author: | Guest [ Tue Sep 30, 2003 21:51 ] |
| Post subject: | |
Any of you know how to build a simple interface for the flat ribbon cable in the pictuer above???? It is next to impossible to buy anything where I am and I think I am going to have to build something. Thanks |
|
| Author: | Henri [ Sat Oct 04, 2003 10:44 ] |
| Post subject: | |
Anonymous wrote: Any of you know how to build a simple interface for the flat ribbon cable in the pictuer above????
It is next to impossible to buy anything where I am and I think I am going to have to build something. Thanks Maybe you could try soldering straight to the PCB if that's possible. |
|
| Page 1 of 2 | All times are UTC + 2 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|