LCDInfo.com

http://www.lcdinfo.com
It is currently Mon Oct 07, 2024 13:05

All times are UTC + 2 hours




Post new topic Reply to topic  [ 13 posts ] 
Author Message
 Post subject: Looking for a datasheet
PostPosted: Mon Aug 29, 2005 23:50 
Offline

Joined: Tue Jun 14, 2005 23:13
Posts: 29
Location: Toronto, Canada
I'm looking for the datasheet for a NEC PD640G400BA LCD [ VFD? ] display.

It's about one foot by half-a-foot, comes with [ what I assume to be ] a powersupply with a red wire, a black wire and a blue wire [ I'm thinking 5v, 12v and (-) ] and a 12 pin connecter that hooks it up to the display panel.

comming off of the display is a 20pin ribbon cable.


The one chip, that I assume to be the controller, has the following info printed on itself;

____________
| NEC -- Japan |
| D65002G094 |
| |
| 8605 |
|____________|

It has pins on all sides.



ANY help on identifying this board is much appreciated.

[ silkscreened on the board ]
NEC PD640G400BA-BA
151-880389(151-882629)


Top
 Profile  
 
 Post subject:
PostPosted: Tue Aug 30, 2005 3:38 
Offline

Joined: Tue Jun 14, 2005 23:13
Posts: 29
Location: Toronto, Canada
Lets see what NEC has to give me.
-------------------------------------------------------
techsupport@necdisplay.com
Unknown NEC LCD


Good day.

I recently aquired a NEC display and was curious if I could have the datasheet for it-- the 'Technical Library' section on the NEC Display website have no information.

The number that's printed on the back of the panel is as follows;
NEC PD640G400BA-BA
151-880389(151 -882629)

What I'm most interested in is a pinout of the 20-wire connector that comes out from the panel.

Any documentation reguarding this device is most appreciated. I'm just a student looking to do something fun.

Many thanks in advance.

Stand out from the crowd...
-Philip ;-)


Top
 Profile  
 
 Post subject:
PostPosted: Wed Aug 31, 2005 22:17 
Offline

Joined: Tue Jun 14, 2005 23:13
Posts: 29
Location: Toronto, Canada
Email people think that it's a complete monitor I'm looking for, even though I'm specifying it's a PCB... I thought that I'd better move on.

So I called in and all I'm getting is that they don't sell schematics nor give out any information because it's proprietary.


This is not fun.



Anyone? Any speculations?


Top
 Profile  
 
 Post subject: 56K WARNING!!
PostPosted: Tue Nov 15, 2005 2:28 
Offline

Joined: Tue Jun 14, 2005 23:13
Posts: 29
Location: Toronto, Canada
I got around to taking some photos.

Image
This is the screen.

Image
That's the back of the unit.

Image
That's, what I think is, the power supply removed [ the bag says it's an "LCD screen with driver"... but it's lookin' like a VFD ].

Image
Blurry closeup with the 20 pin connector that I've gotta adapt to the LPT port.

Image
Back of the panel with the power supply removed.

Image
Close up of the centre area-- on the left is the 12-pin connector that comes from the power supply as well as the model/serial/part numbers.

Image
Power supply unit.

Image
Underside of the unit. Lower right of the board, from top to bottom, are the black, red, and blue connections. Black looks like it's ground.

Image
Topside with the heatsink lifted up.

Image
Topside with the heatsink lifted up and looking under.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Nov 15, 2005 6:26 
Offline

Joined: Sun Nov 13, 2005 12:34
Posts: 2
d-frag-r wrote:
is that they don't sell schematics nor give out any information because it's proprietary.


Contact them posing as a non-affiliated electronic repairman, statingthat you have a faulty piece of equipment, using that display, and you need to know the pinout of the system so as to backtrace the problem?

Wild guesss that might work.

-=DD32=-


Top
 Profile  
 
 Post subject:
PostPosted: Wed Nov 16, 2005 22:31 
Offline

Joined: Tue Jun 14, 2005 23:13
Posts: 29
Location: Toronto, Canada
DD32 wrote:
Contact them posing as a non-affiliated electronic repairman, statingthat you have a faulty piece of equipment, using that display, and you need to know the pinout of the system so as to backtrace the problem?


Blast! Shot down... they said for me to send it to them and they'd take care of fixing it.

Thanks for the idea, tho.


Anyone else? Anything? The board cost me $10 and I could prolly go out and get another one if I blow this one... I haven't been able to find any scematics about how to hook up a VFD... and what voltages sound reasonable to hook the power supply up to?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Nov 16, 2005 23:24 
Offline
User avatar

Joined: Sat Apr 17, 2004 17:42
Posts: 467
Location: The Netherlands
Doesn't look like VFD to me. More like gas plasma or EL.
Whithout datasheet it's gonna be a very hard yes.

_________________
My Plexeon-Insane LCD!-Or this one!-LCDinfo-LCDStudio


Top
 Profile  
 
 Post subject:
PostPosted: Thu Nov 17, 2005 7:03 
Offline

Joined: Tue Jun 14, 2005 23:13
Posts: 29
Location: Toronto, Canada
coorz wrote:
Doesn't look like VFD to me. More like gas plasma or EL.
Whithout datasheet it's gonna be a very hard yes.


hm... That's not exactly what I wanted to hear...


... alright, it's made of glass... and I'm assuming that EL needs less power than a plasma... so what's the standard running voltage for an EL display-- from my understandings, plasma requires more power... and I don't want to fry the thing if, by chance, it is an EL



... Along that train of thought... it's made of glass... COULD it explode [ shards of glass everywhere isn't my thing ]?


Top
 Profile  
 
 Post subject:
PostPosted: Fri Nov 18, 2005 3:25 
Offline

Joined: Sat Nov 12, 2005 19:35
Posts: 7
Just wear a pair of glasses or some kind of face shield when you power it up, exploding glass is awesome (as long as it doesn't end up in your eye)!

I'm heading out to a couple of electronic places this weekend, I will see if any of them have any information on this display.

Whats that number you have for NEC? Perhaps I may catch them on a good day and they will cough up the information...? Its worth a shot any ways.

If you get real desperate, you could always trace back the PCB traces and make some kind of pinout assumption from that.

Thanks.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Nov 18, 2005 8:19 
Offline

Joined: Tue Jun 14, 2005 23:13
Posts: 29
Location: Toronto, Canada
LiquidCrystalDecay wrote:
Just wear a pair of glasses or some kind of face shield when you power it up, exploding glass is awesome (as long as it doesn't end up in your eye)!


haha, Thanks for the advice.


LiquidCrystalDecay wrote:
I'm heading out to a couple of electronic places this weekend, I will see if any of them have any information on this display.


That would rock.


LiquidCrystalDecay wrote:
Whats that number you have for NEC? Perhaps I may catch them on a good day and they will cough up the information...? Its worth a shot any ways.


This is their 'technical' phone number, in America; +1 800-366-9782

... the lady was rather short with me... like I was out for all their secrets :/


LiquidCrystalDecay wrote:
If you get real desperate, you could always trace back the PCB traces and make some kind of pinout assumption from that.


Suprisingly enough, this is my next step... but so far searching for individual components hasen't yielded many results.

Will push on.


Cheers.


P.S. Well, that's odd... on NEC's website there's a page with document listings [ http://www.necel.com/en/support/document.html ]... I remember not being able to find a document about the display, but I don't remember the option being greyed out... :S


Top
 Profile  
 
 Post subject:
PostPosted: Mon Nov 28, 2005 18:27 
Offline

Joined: Tue Jun 14, 2005 23:13
Posts: 29
Location: Toronto, Canada
Alright, I think I broke this case [ not the panel, don't worry ]. I was just messin' around on NECs site and I came accross a VFD IC that matches the packaging [ it was the only one with a 52 pin configuration ], so I went on a hunt and came accross this datasheet;
http://pdf.alldatasheet.com/datasheet-p ... 16311.html

One thing that I'm noticing is that the chip is meant to drive a 12 x 4 display and there are 24 other chips floating around. Would it be plausable that the IC I've got uses two outputs to send a signal to a slave IC that then deecodes the information for their segment of the overall display?

Now, it says that it's capable of serial communication-- is it just a simple matter of tracing which pins on the IC go to what pin on the header, and wiring it all up?

This is exciting... I'll have to dig up my soldering stuff soon [ everything's in boxes 'cause we're reno'ing-- :S ].


Cheers.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 02, 2008 14:21 
Offline

Joined: Tue Sep 02, 2008 14:17
Posts: 1
I got a display similar to this one, except it's a 512x342 board... Registration is PD512G342AA-AA. Does anyone have the datasheet for this thingey? Did the topicstarter ever find more about these units?


Top
 Profile  
 
PostPosted: Tue Aug 16, 2011 2:13 
Offline

Joined: Tue Aug 16, 2011 2:10
Posts: 1
I have recently come across these displays at Gateway Electronics. I went ahead and picked a few up (they were only $5). However, the closest thing to evidence that these things even exist is this forum topic. Has anybody located any information on these yet? I'd be highly appreciative of anybody who could point me in a semi-correct direction.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

All times are UTC + 2 hours


Who is online

Users browsing this forum: Google [Bot] and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group