LCDInfo.com

#define DISPLAY_ON         0x3f  //0011 1111
#define DISPLAY_OFF        0x3e  //0011 1110
#define DISPLAY_STARTLINE  0xc0  //1100 0000
#define DISPLAY_PAGE_SET   0xb8  //1011 1000
#define DISPLAY_COLUMN_SET 0x40  //0100 0000

void cKS0108::WriteCommand(unsigned char Command, unsigned char CS)
{
  Delay(delay);

  SetPortVal(CONTROL, ENABLE_LO | CS | RS_LO, 1);
  SetPortVal(DATA, Command, 1);
  SetPortVal(CONTROL, ENABLE_HI | CS | RS_LO, 1);
  Delay(delay);
  SetPortVal(CONTROL, ENABLE_LO | CS | RS_LO, 1);

  //SetPortVal(DATA, 0, 1);
}

void cKS0108::WriteData(const unsigned char Data[], unsigned int amount)
{
 unsigned char cs;
 unsigned int counter;
 for (counter=0; counter < amount;counter++)
 {
    cs = CurrentColumn>63?CS2:CS1;

    Delay(delay);
    SetPortVal(CONTROL, ENABLE_LO | cs | RS_HI, 1);
    SetPortVal(DATA, Data[counter], 1);
    SetPortVal(CONTROL, ENABLE_HI | cs | RS_HI, 1);
    Delay(delay);
    SetPortVal(CONTROL, ENABLE_LO | cs | RS_HI, 1);

    CurrentColumn++;
    if (CurrentColumn > 127)
       return;
 }
}

void cKS0108::SetColumn(unsigned char y)
{
  CurrentColumn = y;
  if (y < 64)
  {
     WriteCommand(DISPLAY_COLUMN_SET | (y&63), CS1);
     WriteCommand(DISPLAY_COLUMN_SET | 0, CS2);
  } else
  {
     WriteCommand(DISPLAY_COLUMN_SET | 63, CS1);
     WriteCommand(DISPLAY_COLUMN_SET | ((y-64)&63), CS2);
  }
}

void cKS0108::SetPage(unsigned char x)
{
  Delay(delay);
  WriteCommand(DISPLAY_PAGE_SET | x, CS1);
  WriteCommand(DISPLAY_PAGE_SET | x, CS2);
}

void cKS0108::SetStartLine(unsigned char line)
{
  WriteCommand(DISPLAY_STARTLINE | (line & 63), CS1);
  WriteCommand(DISPLAY_STARTLINE | (line & 63), CS2);
}

void cKS0108::InitLCD()
{
  unsigned char value;
  int x, a;
  value = 0x0;

  WriteCommand(DISPLAY_ON, CS1);
  WriteCommand(DISPLAY_ON, CS1);
  SetStartLine(0);

  for (x=0;x < 8;x++)
    {
      SetPage(x);SetColumn(0);
      for (a = 0 ;a < 128; a++)
      WriteData(&value, 1);
    }
}