This is some copy/paste from another topic:
http://www.skippari.net/phpBB2/viewtopic.php?t=112
Henri wrote:
I don't have a T6963C display using the Pollin wiring (i guess that's what you're using) at hand right now so I only was able to use the virtual lcd in the driver test but I can test this later.
MaikRutsche wrote:
You have a different wirring?
All paramters are seperate adjustable.
If you give me a schematic of your wiring then a could make a new option in the driver.
Henri wrote:
Yes, I have a display with the powerlcd wiring to test wiring settings in the new LCDInfo version. In that you can define yourself how you have the pins connected.
But I also have a 240x64 display with the pollin wiring so I should be able to test your drivers soon.
/* pollin*/
int wr=1;
int rd=17;
int cd=16;
int ce=14;
/* powerlcd*/
int wr=16;
int rd=14;
int cd=17;
int ce=1;
MaikRutsche wrote:
So here is the new Version:
Driver-Testprogram:
http://www.wh19.tu-dresden.de/~maik/glc ... erTest.zipLook at the T6963C.ini and you will find 4 new options:
Pin_WR=1
Pin_CE=14
Pin_CD=16
Pin_RD=17