| LCDInfo.com http://forum.lcdinfo.com/ |
|
| Using the T6963C LCD controller? http://forum.lcdinfo.com/viewtopic.php?f=9&t=1631 |
Page 1 of 1 |
| Author: | snj_lcduser [ Mon Jul 24, 2006 22:36 ] |
| Post subject: | Using the T6963C LCD controller? |
Hello, I am just starting to program with the pic p18f4480, and T6963C controller to display text/graphics on an LCD unit. The LCD is 128x128, and I am using the Microchip C18 compiler. I was hoping to find some examples on the internet based in the C18 (c) language, which could help me start sending commands/data to the LCD. I understand from the T6963c data sheet the command and data will be written as a byte. And before every read/write to the toshiba controller the status must be checked. I wondered if anyone had any examples in the C18, c language which I could use as a start point? Thank you |
|
| Author: | Henri [ Wed Jul 26, 2006 18:13 ] |
| Post subject: | |
It's not C18 but at least it's C code for microcontroller: http://forum.lcdinfo.com/viewtopic.php?t=362 Maybe that could help you a bit. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|