LCDInfo.com • View topic

View unanswered posts | View active topics

Board index » General display discussion » Development

All times are UTC + 2 hours

S1D13700

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

actron

Post subject: S1D13700

Posted: Mon Oct 31, 2005 1:53

Joined: Mon Oct 31, 2005 1:40
Posts: 1

Hi,

I have a S1D13700 (SED1335 compatible) driving a Hitachi 320x240 LCD, configured in text mode, direct addressing mode.

The problem is that I write a character at 0,0 O.K but it is duplicated in the Y axis for the full height of the display!

Can anybody suggest an electronic reason this might happen?

My initialisation settings are.

MCR = 0x30
HCS = 0x07
VCS = 0x07
CBPR = 40
TBPR = 52
L/F = 239
AP = 41
SB1SA = 0
SB1SZ = 239

Thanks

Top

penjuin

Post subject:

Posted: Mon Oct 31, 2005 7:58

Joined: Sun Oct 16, 2005 10:10
Posts: 27
Location: Australia

im not an expert, but it sounds like a wiring error. Probably best if you recheck it all

Top

gsf

Post subject: S1D13700

Posted: Mon Jan 22, 2007 10:08

Joined: Wed Jan 17, 2007 22:37
Posts: 2

What wiring connection do you use?
The LPT one!

Top

Page 1 of 1

[ 3 posts ]

Board index » General display discussion » Development

All times are UTC + 2 hours

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum