LCDInfo.com

http://www.lcdinfo.com
It is currently Thu Dec 05, 2024 12:54

All times are UTC + 2 hours




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Nokia LCD 1600
PostPosted: Mon Feb 01, 2010 4:11 
Offline
User avatar

Joined: Mon Feb 01, 2010 4:05
Posts: 1
Hello

I have a Nokia 1600 LCD (RH-64 model) which I would like to use with a PIC Microcontroller.

http://img197.imageshack.us/img197/4913/abcd0003tu.jpg
Image

http://img109.imageshack.us/img109/9421/abcd0005i.jpg
Image

I've seen on other websites that this LCD is compatible with these other models:

* Nokia 1600
* Nokia 1208
* Nokia 1209
* Nokia 2310
* Nokia 2126 CDMA
* Nokia 6125
* Nokia 6136
* Nokia N71 outside

The LCD features 96*68 pixels and 64k colors.

I would like to get its connector pinout. It has 10 pins and it's very small:

http://img52.imageshack.us/img52/2176/c ... ia1600.png
Image

It seems that this connector from Sparkfun may fit it:

http://www.sparkfun.com/commerce/produc ... cts_id=570

Do you have any hint on how to make it work on a microcontroller? Its pinout would be useful.

http://img62.imageshack.us/img62/3633/abcd0007s.jpg
Image

Thanks in advance.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 30, 2010 20:24 
Offline

Joined: Fri Jul 30, 2010 20:12
Posts: 10
Since you got the PCB hardware, why not do some analysis. You should get all pin-out figured out when all hardware on-hands.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 30, 2010 20:25 
Offline

Joined: Fri Jul 30, 2010 20:12
Posts: 10
If you got a hot-air gun, you can easily take off the one on the cell phone and reuse it.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 30, 2010 21:18 
Offline

Joined: Fri Jul 30, 2010 20:12
Posts: 10
Here is the result from google, but you need verify from your circuit boards:

1. CLK
2. SDA
3. GND
4. CS\
5. RESET\
6. VLED+, 7.5V
7. VLED-,
8. Not connected
9. Vdd, +2.8V
10. VIO, +1.8V

You should be able to verify Ground, Vdd by using a multimeter without taking anything apart. If you got a oscilloscope, you can find more info from your hardware.

This LCD module is now sold under US$5 (including shipping), really good bargain.


Top
 Profile  
 
 Post subject: Re:
PostPosted: Fri Feb 04, 2011 21:53 
Offline

Joined: Fri Feb 04, 2011 21:15
Posts: 2
funnynypd wrote:
Here is the result from google, but you need verify from your circuit boards:

1. CLK
2. SDA
3. GND
4
...........


Thanks funnynypd for letting us know, I will test this right away and let you guys know. I suspect that the controller is an ST7626.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group