LCDInfo.com

http://www.lcdinfo.com
It is currently Sat Nov 16, 2024 15:17

View unanswered posts | View active topics


Board index » General display discussion » Hardware

All times are UTC + 2 hours




Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Print view Previous topic | Next topic 
Author Message
CyberVillain
 Post subject: Is this KS0108 or not?
PostPosted: Thu Mar 17, 2005 19:44 
Offline

Joined: Thu Mar 17, 2005 19:44
Posts: 6
I've found a really nice PLED 128x64 display.
Image

Its suposed to be KS0108, but i've compared the pinouts with a display that i know is KS0108, and they differ on some pins... any KS0108 expert here that can take a look at the procuct specification PDF?

http://www.elfa.se/pdf/75/07550122.pdf

Regards, Anders
Top
 Profile  
 
Henri
 Post subject:
PostPosted: Fri Mar 18, 2005 1:08 
Offline

Joined: Sun May 05, 2002 22:05
Posts: 2063
Location: Lappeenranta, Finland
Heh, ok I'll just copy things here.

Henri wrote:
That doesn't look like KS0108 to me.

Do you have more complete datasheet that would also show the commands used to control it ?


Henri wrote:
Ok I also checked Bolymin site for any information about this display and found just the same PDF there. Maybe you could email Bolymin and ask for more information about the display.

I can now see that it says "KS0108 alike" in the PDF but as it doesn't have CS lines it has to be somewhat different. But maybe the command set otherwise is same as KS0108 but would be nice to have more information about the controller used in it. Also would be nice to know more about the Vcol, Vrow and Vbt.
Top
 Profile  
 
coorz
 Post subject:
PostPosted: Fri Mar 18, 2005 2:16 
Offline
User avatar

Joined: Sat Apr 17, 2004 17:42
Posts: 467
Location: The Netherlands
Would be interesting to see one of those running. Here's a link to a dutch site selling them, includes two links to techsheets, maybe they are similar to yours.
http://www.vandijkenelektronica.nl/site ... ts_id=1092

_________________
My Plexeon-Insane LCD!-Or this one!-LCDinfo-LCDStudio
Top
 Profile  
 
Henri
 Post subject:
PostPosted: Wed Mar 23, 2005 21:31 
Offline

Joined: Sun May 05, 2002 22:05
Posts: 2063
Location: Lappeenranta, Finland
Interestingly those two look like they are the same display.

Henri wrote:
Looks like the instruction set is something like KS0108 but still the display won't work with software done for KS0108. One KS0108 can only handle a 64x64 pixel area so that's why there are two KS0108 IC's and chip selects in a 128x64 KS0108 display. But this one doesn't have any chip selects and seems to only have one controller that can handle the whole 128x64 area. This makes the code simpler to write than for KS0108 as there's no need to change the controller at the 64 pixel boundary. But this also means that KS0108 code won't work with this.

Also the datasheet is saying that the bytes are arranged horizontally in the display memory instead of vertically like with KS0108.

So seeing all these differences I'm not really sure why it's called "KS0108 alike" controller.

But there should be no problems using this in LPT port if a driver is written for this display.
Top
 Profile  
 
CyberVillain
 Post subject:
PostPosted: Tue Mar 29, 2005 16:10 
Offline

Joined: Thu Mar 17, 2005 19:44
Posts: 6
looks like the request part of this forum is closed.. anyone knows where i can request driver support for this display in LCDInfo?
Top
 Profile  
 
coorz
 Post subject:
PostPosted: Tue Mar 29, 2005 16:22 
Offline
User avatar

Joined: Sat Apr 17, 2004 17:42
Posts: 467
Location: The Netherlands
Ask the guy two posts above this one :wink:

_________________
My Plexeon-Insane LCD!-Or this one!-LCDinfo-LCDStudio
Top
 Profile  
 
CyberVillain
 Post subject:
PostPosted: Tue Mar 29, 2005 16:54 
Offline

Joined: Thu Mar 17, 2005 19:44
Posts: 6
Cool, didnt know Henri was the maker of LCD Info.. :)

So LCD Info is a scandinavian product then ;)
Top
 Profile  
 
Henri
 Post subject:
PostPosted: Sun Apr 03, 2005 11:23 
Offline

Joined: Sun May 05, 2002 22:05
Posts: 2063
Location: Lappeenranta, Finland
CyberVillain wrote:
looks like the request part of this forum is closed.. anyone knows where i can request driver support for this display in LCDInfo?

Yep I would probably be the one to ask for driver support ;)

This looks like interesting display so you can expect driver support for it when I manage to get one in my hands.
Top
 Profile  
 
CyberVillain
 Post subject:
PostPosted: Mon Apr 04, 2005 10:50 
Offline

Joined: Thu Mar 17, 2005 19:44
Posts: 6
thats good news Henri!
Top
 Profile  
 
CyberVillain
 Post subject:
PostPosted: Tue Dec 13, 2005 18:02 
Offline

Joined: Thu Mar 17, 2005 19:44
Posts: 6
is there any hope for driversupport for this baby?
Top
 Profile  
 
coorz
 Post subject:
PostPosted: Tue Dec 13, 2005 18:30 
Offline
User avatar

Joined: Sat Apr 17, 2004 17:42
Posts: 467
Location: The Netherlands
This one looks more like KS0108
http://gathering.tweakers.net/forum/lis ... es/1094847

_________________
My Plexeon-Insane LCD!-Or this one!-LCDinfo-LCDStudio
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Board index » General display discussion » Hardware

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 41 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group