LCDInfo.com

http://www.lcdinfo.com
It is currently Fri Nov 22, 2024 23:02

View unanswered posts | View active topics


Board index » Other » LCDInfo 0.3 (0.4)

All times are UTC + 2 hours




Forum locked This topic is locked, you cannot edit posts or make further replies.  Page 1 of 1
  [ 13 posts ] 
  Print view Previous topic | Next topic 
Author Message
Hase
 Post subject:
PostPosted: Tue Jan 07, 2003 15:07 
Offline

Joined: Mon Dec 23, 2002 17:48
Posts: 22
Location: cow village, austria ;)
Götz wrote:
With PicView PVG 121202BYN 128x128 6x8 Font there are the last 2 columns are overwritten by the first 2.


hmmm, I'm using the exact same display and it works fine. maybe you should check your wiring?
Top
 Profile  
 
Götz
 Post subject:
PostPosted: Tue Jan 14, 2003 11:53 
Offline

Joined: Mon Jan 06, 2003 20:38
Posts: 11
Location: Berlin, Germany
Hase wrote:
Götz wrote:
With PicView PVG 121202BYN 128x128 6x8 Font there are the last 2 columns are overwritten by the first 2.


hmmm, I'm using the exact same display and it works fine. maybe you should check your wiring?

I do not think so, because have a look at the pictures at
http://www.skippari.net/phpBB2/viewtopic.php?t=14&postdays=0&postorder=asc&start=0
That is the same effect. On 2.,3. and 4. picture you can see that last 2 pixel columns are the same as first 2. I have one testboard for 128x128 and 160x128 and on the 160x128 there is no such effect.
Götz
Top
 Profile  
 
Henri
 Post subject:
PostPosted: Tue Jan 14, 2003 18:18 
Offline

Joined: Sun May 05, 2002 22:05
Posts: 2063
Location: Lappeenranta, Finland
I think I know the reason for this.

Some calculations:
We have 128 pixels and 6 pixel wide font.
128/6 = 21,33

I have the BYTES_PER_ROW set to 21 in the current versions and this leaves 1/3 bytes extra that happens to be the 2 pixels.

I now changed this to 22 in the code so this may be fixed in the next version.
Top
 Profile  
 
Hase
 Post subject:
PostPosted: Tue Jan 14, 2003 18:25 
Offline

Joined: Mon Dec 23, 2002 17:48
Posts: 22
Location: cow village, austria ;)
you're right. i made a test screen with columns 1 and 2 black, and there you are ... columns 127 and 128 are black, too 8O .

i never noticed this because my screens are symmetrical and have a 2 pixel border around them 8)
Top
 Profile  
 
Henri
 Post subject:
PostPosted: Tue Jan 14, 2003 18:47 
Offline

Joined: Sun May 05, 2002 22:05
Posts: 2063
Location: Lappeenranta, Finland
Yep, this is one situation where a display to test would be great as I'm still not sure how it will behave. 160x128 6x8 font display may have this same problem too.
Top
 Profile  
 
Götz
 Post subject:
PostPosted: Tue Jan 14, 2003 18:55 
Offline

Joined: Mon Jan 06, 2003 20:38
Posts: 11
Location: Berlin, Germany
Henri wrote:
160x128 6x8 font display may have this same problem too.

I'm not able to test this because my display is hardwired to 8x8. May it cause problems when I cut the FS line from ground and wire it to +5V?
Top
 Profile  
 
Henri
 Post subject:
PostPosted: Thu Jan 16, 2003 11:40 
Offline

Joined: Sun May 05, 2002 22:05
Posts: 2063
Location: Lappeenranta, Finland
Götz wrote:
Henri wrote:
160x128 6x8 font display may have this same problem too.

I'm not able to test this because my display is hardwired to 8x8. May it cause problems when I cut the FS line from ground and wire it to +5V?

No problem, I believe someone else could test that.

Depending of the display wiring FS line to High may not be enough as also the MD lines affect the usable font size. But changing these shouldn't be any harder than changing the FS line.
Top
 Profile  
 
Götz
 Post subject:
PostPosted: Fri Jan 17, 2003 12:26 
Offline

Joined: Mon Jan 06, 2003 20:38
Posts: 11
Location: Berlin, Germany
Henri wrote:
Götz wrote:
Henri wrote:
160x128 6x8 font display may have this same problem too.

I'm not able to test this because my display is hardwired to 8x8. May it cause problems when I cut the FS line from ground and wire it to +5V?

No problem, I believe someone else could test that.

Depending of the display wiring FS line to High may not be enough as also the MD lines affect the usable font size. But changing these shouldn't be any harder than changing the FS line.

It works. I breaked the FS1 line to GND und wired it to unused FS pin 19 and set it up +5V.
In 128x128 6x8 or 240x64 mode there is no problem with overwrited columns.
Only problem is the first 64 rows are correct last 64 rows are scrambled.
http://www.locamation.com/locam01/02_IndustrialComputers/Z_Displays/Datasheets/TLX-1013-EO.PDF

Götz
Top
 Profile  
 
Henri
 Post subject:
PostPosted: Fri Jan 17, 2003 21:43 
Offline

Joined: Sun May 05, 2002 22:05
Posts: 2063
Location: Lappeenranta, Finland
Sorry I didn't quite get what displays work and which don't.
Götz wrote:
In 128x128 6x8 or 240x64 mode there is no problem with overwrited columns.

So are there any other problems with these displays ? And what fixed the column problem with the 128x128 display ?

Quote:
Only problem is the first 64 rows are correct last 64 rows are scrambled.

With the 160x128 display and in both 6x8 and 8x8 modes ?
Top
 Profile  
 
Götz
 Post subject:
PostPosted: Mon Jan 20, 2003 11:03 
Offline

Joined: Mon Jan 06, 2003 20:38
Posts: 11
Location: Berlin, Germany
Henri wrote:
Sorry I didn't quite get what displays work and which don't.
Götz wrote:
In 128x128 6x8 or 240x64 mode there is no problem with overwrited columns.

So are there any other problems with these displays ? And what fixed the column problem with the 128x128 display ?

Quote:
Only problem is the first 64 rows are correct last 64 rows are scrambled.

With the 160x128 display and in both 6x8 and 8x8 modes ?

OK,OK :wink:
Display PicView PVG 121202BYN 128x128 : overwritten last 2columns.
Display Toshiba TLX-1013-EO 160x128 6x8:
last 64 rows are scrambled
no overwritten last 2columns for a 128x128 picture.
Some pictures: http://pcitr4.fb10.tu-berlin.de/liste/index.html
Top
 Profile  
 
GROUPGLOBAL
 Post subject:
PostPosted: Mon Jan 20, 2003 16:44 
Götz wrote:
Henri wrote:
Sorry I didn't quite get what displays work
Some pictures: http://pcitr4.fb10.tu-berlin.de/liste/index.html


there are no pictures :roll: 8O :x
Top
  
 
Götz
 Post subject:
PostPosted: Mon Jan 20, 2003 17:13 
Offline

Joined: Mon Jan 06, 2003 20:38
Posts: 11
Location: Berlin, Germany
GROUPGLOBAL wrote:
Götz wrote:
Henri wrote:
Sorry I didn't quite get what displays work
Some pictures: http://pcitr4.fb10.tu-berlin.de/liste/index.html


there are no pictures :roll: 8O :x

Ups, sorry. Now it 's right.
Top
 Profile  
 
Henri
 Post subject:
PostPosted: Mon Jan 20, 2003 18:04 
Offline

Joined: Sun May 05, 2002 22:05
Posts: 2063
Location: Lappeenranta, Finland
Götz: Would you email me so that I can send you a test version ?
Top
 Profile  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  Page 1 of 1
  [ 13 posts ] 

Board index » Other » LCDInfo 0.3 (0.4)

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group