LCDInfo.com

first sorry about double posting... this is the right place

i have Toshiba TLX-5156S-C3M lcd
have this lcd without any cables
how can i plug him into my pc?

here some photos
http://members.lycos.nl/robbyentommy/fo ... 01.JPG.JPG
http://members.lycos.nl/robbyentommy/fo ... 02.JPG.JPG
(i have no cables....)
http://members.lycos.co.uk/sbazel/PC/Image(033).jpg
http://members.lycos.co.uk/sbazel/PC/Image(032).jpg
http://members.lycos.co.uk/sbazel/PC/Image(031).jpg

there is 15 pin set and 3 pin set....

Where to should i connecnt this
i have ob video card...
tnx m8s

A quick google tells me this is a colour STN LCD (could be wrong), and going by the pictures it doesn't contain an onboard controller, so this can't directly connect directly to the PC, at least not without an external controller.

Whenever there is a request for help or advice it is always best to supply as much information as can be gained, sometimes a close-up image of the PCB is enough. eg; If there are IC's then list how many and the writing on each. If in reference to the LCD then list LCD type, origin, number of pixels (WxH), colour(s), backlight type, voltages, etc..

_________________
myLCD - An LCD framebuffer library
(KS0108, PCD8544, SED1565, SED1335,
Nokia Colour LCD's, T6963C, TCP/IP, etc..)
http://mylcd.sourceforge.net/

k tnx man
and sorry 4 my ban english.
that all the details i have about this lcd.. sry if it's no enough.
i know that it came from old laptop.

Is there any way to connect it to normal video card?
good day

Without some additional controller / logic circuitry (be it discrete logic, fpga, cpld or something) / some other way to adapt the interfaces, not really.

So probably not very cost efficient to try getting your display to work with normal video card.

When i connect the 2 and the 16 pin i think to 12V, the lcd turn on!
so now maybe i can conncect that?
will this help me:

?

TNX