LCDInfo.com

hey how u guys doing im trying to do a project with this lcd screen i took of a epson r320 printer i called the company and other parts retailers and cant find the part number to find out if u guys have done anything with it. i toke some pictures of it to see if u guys can identify it.







plz help im trying to configure this and get it to work.. the second pic is the board that was on back of the lcd and the last was attached to the first board and the printer thanks ahead of time

anybody???? bump bump bump

ok i found this out about it i used a multimeter and te little bit of knowledge i know about this stuff plz help out people

Pin 1: 5v
Pin 2: 3.25v led
Pin 3: grnd
Pin 4: 3.25v led
Pin 5: ?
Pin 6: ?
Pin 7: 1.10v
Pin 8: grnd
Pin 9: 1.25v

im guessing pins 5 and 6 are h and v sync so what are 7 and 9 at 1.10v and 1.25v ????? and also can i hook this up to a vga connecter and get it working any help appriciated

bump bump bump bump bump bump anyone!!!!

bump

Looks like you have a controller to match the display but unfortunately that seems to be some Epson proprietary IC so there's no documentation available for it. So it's difficult to know how to communicate with it. Using a logic analyzer it might be possible to figure out how it works if you're able to listen to a working system.