LCDInfo.com • View topic - IEE VFD 4x20 03601-90

View unanswered posts | View active topics

Board index » General display discussion » Hardware

All times are UTC + 2 hours

IEE VFD 4x20 03601-90

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

Truzzone

Post subject: IEE VFD 4x20 03601-90

Posted: Thu Sep 30, 2004 18:36

Joined: Mon May 24, 2004 15:42
Posts: 14
Location: E1 D1v1n0

Hi,
the vfd photos [click on the photos for zoom]:

I find this datasheet.
I wiring the vfd with this schematic from VFDWorld

I run LCDInfo (0.6 build17), configure to HD44780 4x20 and only in 8 bit mode I see a strange characters (only characters are alternated by two space) and when I close LCDInfo I see in the end of vfd 'Goodbye Bye!'

The vfd are wiring correctly?
Is it compatoble with HD44780?
What I do for work correctly the vfd? :?:

Truzzone

_________________
Sorry for my bad English.

Top

Henri

Post subject:

Posted: Wed Oct 06, 2004 17:27

Joined: Sun May 05, 2002 22:05
Posts: 2063
Location: Lappeenranta, Finland

Sounds that either the VFD isn't HD44780 compatible or then the timings of the LCDInfo HD44780 driver don't work with it. There was also some other reports of another VFD that was supposed to be HD44780 compatible not working correctly with the driver.

Top

Truzzone

Post subject:

Posted: Wed Oct 06, 2004 17:57

Joined: Mon May 24, 2004 15:42
Posts: 14
Location: E1 D1v1n0

I try with other program for lcds: lcdsmartie and with jalcds I see a charapters similar to the word I digit in the software, for example 'hello hello' in the display I see 'hÃ¨go Ã¹elÃ²o' :cry:

, LCDInfo is the only I see a correct word 'Good Bye' for this I think that the vfd is a HD44780 compatible

Truzzone

_________________
Sorry for my bad English.

Top

Henri

Post subject:

Posted: Sat Oct 09, 2004 11:46

Joined: Sun May 05, 2002 22:05
Posts: 2063
Location: Lappeenranta, Finland

Have you done any programming ? It might help changing the timings in the driver.
Maybe I could also try doing this but experimenting would be easier for you as you have the real hardware to test.

Top

Truzzone

Post subject:

Posted: Sat Oct 09, 2004 14:31

Joined: Mon May 24, 2004 15:42
Posts: 14
Location: E1 D1v1n0

If you are think it is only the timings, I know a little of programming and I have a friends that programming from 2/3 year in delphi and c.
Whichever help are welcome

Truzzone

_________________
Sorry for my bad English.

Top

Henri

Post subject:

Posted: Sat Oct 16, 2004 12:56

Joined: Sun May 05, 2002 22:05
Posts: 2063
Location: Lappeenranta, Finland

You can find the latest LCDInfo HD44780 driver sources here: http://www.cme.co.za/rudi/downloads/hd44780_driver.zip

It is mostly the WriteData() and WriteCtrl() functions that could be experimented with to try if different timing could help. Some delays could be added etc...

Top

Truzzone

Post subject:

Posted: Fri Oct 29, 2004 16:22

Joined: Mon May 24, 2004 15:42
Posts: 14
Location: E1 D1v1n0

Hi Henri, please send me a pm or email with your address for send one of my vfd for gift if you have the time for fuction with your LCDInfo :wink:

Truzzone

_________________
Sorry for my bad English.

Top

bbiandov

Post subject:

Posted: Sun Jan 29, 2006 11:08

Joined: Wed Jan 18, 2006 2:03
Posts: 4
Location: Bay Area

I have the same VFD and it works with another little program:

http://vfdworld.com/index.php?page=download

Not sure if it will work with LCDinfo but it defenitely works with this application.

~B

Top

Page 1 of 1

[ 8 posts ]

Board index » General display discussion » Hardware

All times are UTC + 2 hours

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum