LCDInfo.com

http://www.lcdinfo.com
It is currently Sun Nov 24, 2024 17:56

View unanswered posts | View active topics


Board index » LCDInfo 0.6-> » Plugins

All times are UTC + 2 hours




Post new topic Reply to topic  Page 1 of 2
  [ 23 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
DarkElf
 Post subject: Windows Media Player
PostPosted: Thu Dec 04, 2003 10:58 
Offline

Joined: Tue Feb 18, 2003 12:33
Posts: 118
Location: Angers, France
WMP plugin: i'm working on it

may be done in one day or two...

_________________
Shadows move where light should be
Top
 Profile  
 
DarkElf
 Post subject:
PostPosted: Fri Dec 05, 2003 9:39 
Offline

Joined: Tue Feb 18, 2003 12:33
Posts: 118
Location: Angers, France
It's done
my ftp was done this night so i wasn't able to put it, but i sent it to Henri by mail.

I will try again to put it this afertnoon
now i'm going to work on the clock thing :)

_________________
Shadows move where light should be
Top
 Profile  
 
Henri
 Post subject:
PostPosted: Sat Dec 06, 2003 19:37 
Offline

Joined: Sun May 05, 2002 22:05
Posts: 2063
Location: Lappeenranta, Finland
Yep, I have tested the plugin and it works very well. First I tried with WMP8 and it didn't work at all but then I upgraded to WMP9 and it started working immediately.
There's few little things to fix and then it would be good for use. As I have the source I could put it available here but it happened that I forgot to take backup of the SDK compatible with build 14 and now I have made changes to achieve better binary compatibility so I can't compile plugins for build 14. I'll try to be more careful when build 15 comes available.
Top
 Profile  
 
DarkElf
 Post subject:
PostPosted: Sat Dec 06, 2003 19:43 
Offline

Joined: Tue Feb 18, 2003 12:33
Posts: 118
Location: Angers, France
ok...
what should be fixed..
oh yes, the problem with the spectrum
will work on this when i will have time

_________________
Shadows move where light should be
Top
 Profile  
 
rudi Grobler
 Post subject:
PostPosted: Mon Dec 08, 2003 13:36 
Offline

Joined: Tue Dec 02, 2003 12:03
Posts: 107
Location: South Africa
Hi,

Just to make sure, I have to use WMP9? and do I need to install any plugin like with the winamp support?
I have the dll now and I want to start testing it :)

_________________
Rudi Grobler
Top
 Profile  
 
Henri
 Post subject:
PostPosted: Mon Dec 08, 2003 15:12 
Offline

Joined: Sun May 05, 2002 22:05
Posts: 2063
Location: Lappeenranta, Finland
Yes, it looks like WMP9 is needed. You need some plugins for WMP too and if everything goes fine they'll be available later today as I don't have access to them at the moment.
Top
 Profile  
 
DarkElf
 Post subject:
PostPosted: Mon Dec 08, 2003 16:00 
Offline

Joined: Tue Feb 18, 2003 12:33
Posts: 118
Location: Angers, France
the dll should be available here:
http://www.ifrance.com/Dark-Elf/wmplcd.zip

beware... there is a bug in the lcdinfo dll, if you start lcdinfo (and you configured it to work with wmp) without starting wmp9, this will crash lcdinfo
you only have to open wmp once (you could close it after, it will work also)

i will correct this when i will be back at home, this is a few work...

_________________
Shadows move where light should be
Top
 Profile  
 
DarkElf
 Post subject:
PostPosted: Mon Dec 08, 2003 21:46 
Offline

Joined: Tue Feb 18, 2003 12:33
Posts: 118
Location: Angers, France
updated & problem solved

_________________
Shadows move where light should be
Top
 Profile  
 
Henri
 Post subject:
PostPosted: Thu Dec 18, 2003 23:28 
Offline

Joined: Sun May 05, 2002 22:05
Posts: 2063
Location: Lappeenranta, Finland
Build 15 of LCDInfo now includes the updated dll for this plugin. For rest of the files and installation instructions you should look here: http://www.ifrance.com/Dark-Elf/wmplcd.zip
Top
 Profile  
 
DarkElf
 Post subject:
PostPosted: Thu Dec 18, 2003 23:32 
Offline

Joined: Tue Feb 18, 2003 12:33
Posts: 118
Location: Angers, France
thanks :)

_________________
Shadows move where light should be
Top
 Profile  
 
DarkElf
 Post subject:
PostPosted: Wed Dec 24, 2003 10:54 
Offline

Joined: Tue Feb 18, 2003 12:33
Posts: 118
Location: Angers, France
the mem eater bug is corrected ;) it will be in he next release and on my ftp certainly tonight

_________________
Shadows move where light should be
Top
 Profile  
 
DarkElf
 Post subject:
PostPosted: Fri Dec 26, 2003 1:00 
Offline

Joined: Tue Feb 18, 2003 12:33
Posts: 118
Location: Angers, France
ok uploaded, same place as usual ;):
http://www.ifrance.com/Dark-Elf/wmplcd.zip

_________________
Shadows move where light should be
Top
 Profile  
 
toutoune
 Post subject:
PostPosted: Sun Feb 01, 2004 20:22 
Offline

Joined: Sun Feb 01, 2004 20:21
Posts: 4
I try to use this plug in for LCDInfo, but I don't know which variables i have to use in the xml files... is there a list or something in which i can find them?
Top
 Profile  
 
rudi Grobler
 Post subject:
PostPosted: Mon Feb 02, 2004 8:24 
Offline

Joined: Tue Dec 02, 2003 12:03
Posts: 107
Location: South Africa
Have a look at the log.txt file created when you run lcdinfo. It creates a list of all plugins and there variables

_________________
Rudi Grobler
Top
 Profile  
 
DarkElf
 Post subject:
PostPosted: Mon Feb 02, 2004 22:52 
Offline

Joined: Tue Feb 18, 2003 12:33
Posts: 118
Location: Angers, France
do you know read me???
there is also a list inside it!

_________________
Shadows move where light should be
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 23 posts ]  Go to page 1, 2  Next

Board index » LCDInfo 0.6-> » Plugins

All times are UTC + 2 hours


Who is online

Users browsing this forum: No registered users and 10 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group